T862++ IRDA Welder Infrared Heating Rework Station BGA

T862++ IRDA Welder Infrared Heating Rework Station BGA, 1. infrared weld machine, 2. BGA rework station, 3. BGA repair system - details see: https://www.machineto.com/t862-irda-welder-infrared-heating-rework-station-bga-10137988
Place of Origin:Guangdong China (Mainland)Brand Name:PuhuiModel Number:T862++Voltage:220V/110V
Current:50/60HZDimensions:36*33*34Weight:12KGSUsage:Repair IC or mainboard on laptop mobile phone, etc
T862++ IRDA Welder Infrared Heating Rework Station BGA
contact supplier for T862++ IRDA Welder Infrared Heating Rework Station BGA


T862++ IRDA Welder Infrared Heating Rework Station BGA

T862++ Can suitable for all of the component,especially Micro BGA component

1. Adopt infrared weld technology which independent exploration.
2. Use infrared heat,it is easy to cut through,heat proportion piercing tradition weld machine with sirocco.
3. Easily operate.Just need one day training.Can operation this machine.
4. No need weld tools,it can weld all the component of 15x15-35x35mm.
5. This machine has 650W heating system.widely to 120x120mm.
6. Infrared heating no have sirocco flow. Don't impact perimeter scomponent. Can suitable for all of the component,especially Micro BGA component.

Parameter
Working voltage : AC220/110v 50/60Hz
Output power: 800W
Temperature: 100°C-350°C

Operation method

1. Locate, choose and attach the appropriate lens:
The usable of the lenses diameter are 28mm, 38mm, 48mm.
(1)When the area of the chips is below 15mm*15mm, please choose the IR-lamp temperature about 160-240°C, and choose the lens which D=28mm to avoid destroying other places, usually it will take you about 20-40seconds.
(2)When the area of the chips is between 15mm*15mm and 30mm*30mm, please choose the IR-lamp temperature about 240-320°C, and choose the lens which D=38mm to avoid destroying other places, usually it will take you about 30-60seconds.
(3)When the area of the chips is above 30mm*30mm, please choose the IR-lamp temperature 350°C(Attention: you should turn on the pre-heat dish first, and set-up the temperature about 150-200°C,wait 3-5minutes to allow the temperature steady on the set-up temperature),and choose the lens which D=48mmto avoid destroying other places, and keep the lamp body direct light. You should control the time carefully to avoid burning the chips.
Warning
The light system will shoot straightly. Please pay more attention to yourself control time to avoid burning out.
T862++ IRDA Welder Infrared Heating Rework Station BGA
Packaging Detail:1pc in carton
Delivery Detail:in 2-3 days after confirm the payment

Related Product for T862++ IRDA Welder Infrared Heating Rework Station BGA