Home  >  Material Handling Equipments & Parts  >  Material Handling Equipment  >  Bridge Cranes

Suspension Crane, 1. Professional clean room products., 2. Sturdy, durable., 3. Easy to operate. - details see: https://www.machineto.com/suspension-crane-10195669

Suspension Crane

Our ultra low lift type of Suspension Crane is developed for clean room only, not occupy space. The effective hanging distance can be improved whichever vertically, horizontally and head. The rail is installed on the ceiling, will not destroy or occupy the space of the working site, can reach the maximum use of the space of the plant. For the working site is more than 12M in span, we use the multi-track (saddle), so neither to enlarge the steel structure of truss nor to increase the height of plant is required. The hanging structure and the H type steel surface is treated by epoxy powder coating, beautiful and safe.

The clean room used Suspension Crane is suitable for Class100 ~ 100000, equipped with s/steel dust-proof box and dust-proof extension sheath, the main engine can effectively prevent from powder dust and greasy dirt. The castors are made by engine plastic with s/steel material, reduce the possibility of powder dust.

The operation is based on safety. Hand-held operator is mechanical interlocked. The circuit control is also electrical interlocked. There is no complicated installation only easy, convenient and safe assembly. The service life can reach to more than 20 years under proper operation and maintenance.

Customer’s own special inquiry is highly welcome. We can design and plan the most economical and suitable specifications for you.

The specialized equipment for clean room

Surface treatment by epoxy powder coating can reduce the static electricity and is dust-proof.

Main engine is equipped with s/steel anti-rust box and dust-proof expansion sheath to avoid the clean room being polluted by the powder dust or greasy dirt.

There is a s/steel plate mounted between the H type steel and the castors.

The castors are made by engine plastic and s/steel material to avoid the powder dust.

The safe electrical rail is equipped with anti-dust device to isolate the powder dust.

Safety Device

Both the end of horizontal and vertical rail are equipped with limit switch and baffle to avoid the dropping of the main engine.

The internal friction clutch of the hanging machine can lead to the motor idling when over weight hanging and prevent the machine body and load chain from damage.

The upper and lower limit switches will be immediately prompted to stall the motor when over weight lift. Also, there is overheating protection device to protect the motor from overheating and burning.

The emergency stop button will make the whole system power failure and will be restarted manually.

Steel Frame Material

SS400 & SS41steel with spray painting and sandblasting treatment. (SUS304 is available for customer’s choice)

We have our won sandblasting plant, the blasting grade is 2-1/2 and can remove the oil substance, rust, impurities on the steel, also strengthen the basic painting on the steel.

The basic painting is using epoxy anti-rust paint to avoid corrosion.

The surface painting is using clean room grade Epoxy paint to reduce static electricity, can resist high temperature, anti-rust, resist wind and rain.

The customer can choose the painting material.

Operation under high temperature

Heat resistance during high temperature or from high temperature back to normal temperature.

Temperature(°C)	Load reduction (%)
100~200°C	Should reduce 10%
200~300°C	Should reduce 25%
300~350°C	Should reduce 35%
350~400°C	Should reduce 40%
Above 400°C	Stop operation

Please advise key information
1. Lifting Capacity?
2. Single girder or double girder?
3. Lifting height?
4. The Span (center distance between two rails)
5. Power supply: Is 380V/50Hz/3phase acceptable or not?
6. Travel distance ?