Super performance tyre recycle plant with CE, ISO

1.tyre recycle plant for tyre, 2.ISO9001,ISO14001 CE, 3.automatic operation, 4.free polution and safety, 5.energy savin - details see: https://www.machineto.com/super-performance-tyre-recycle-plant-with-ce-iso-10340851

Condition:New	Type:Tire Machine	Tire Machine Type:Tire Recycling Machine	Place of Origin:Henan China (Mainland)
Brand Name:JINZHEN	Model Number:JZS-2979	Voltage:220V	Power(W):14KW
Dimension(LWH):6.6M2.6M2.6M	Weight:35T	Certification:CE,ISO	Warranty:1 year
After-sales Service Provided:Engineers available to service machinery overseas	reactor plate:Q345R	accessories plate:Q235B 304 stainless steel	work pressure:normal
heating type:direct	pwer consumption:25kw	cooling mode:water	welding:autowelding
environmental protection:dust removing device with chemical to absob the sulfur	automatic:autofeeding,autodischargingthe carbon black,autopumping	warranty time:1 year

Super performance tyre recycle plant with CE, ISO

	The raw material	tire,plastic rubber
2	the size of reactor	2.2mX6m,2.2mX6.6m, 2.6mX6.6m, 2.8mX6.6m
3	Average crude oil	45%
4	Average carbon content	30%
5	Average steel content	10%
6	Average gas content	5%
7	The decompose temperature:	maximum temperature is 700 degree
8	Pyrolysis time	10 hours
9	Discharging time	2 hours
10	Feeding time	2 hours
11	Rotating speed	0.8turn/per minute
12	Design pressure	normal

the whole process:

1Use autofeeder and our shovel to feed

2,After 1-1.5 hours feeding

3.After close the cover of the reactor,then set the fire in the furnace

4.After two to four hours heating,it is according to your heating material.then the oil come out

5.The oil come out and lasts for 8-10hours.

6.After all the oil come out,there is no need to wait ,you can discharge the carbon black directly.fist open the door in the cover

7.Then open the door in the reactor,remove the screw,then close the door of the cover to discharge the carbon black.

8.After discharge the carbon black.then get the steel to come out of the reactor.

9.Then you can feed the next batch,No matter how hot it is,becasue we can use the autofeeder.

10.we use the vacuum carbon black discharger to remove the carbon black from the pool.if you use manpower,it is very hot and may burt people,you need to wait for a long time.

11.For the carbon black ,you can sell it to others or you can use the machine to granulate it to stick shape.

12.then you can burn it as heating material.

Environment friendly:

1.Good quality water dedusting system can clean the black smoke to white water steam.

2.The exhaust gas will be recycled for heating reactor, no gas pollution.

3.All junction of the reactor is in good sealing situation with professional sealing material.

Long service life:

1.Material: Q345R special steel plate ,thickness 14mm.fire parts is 16mm.

2. Automatic welding machine.

3. The warranty time of the reactor is 1 year.

How to operate this machine?

1) feed the raw material into furnace automatically or manually, then seal the feed inlet system

2) heat the reactor by burning the fuel material(coal,or wood,or natural gas ,oil ) in the combustion system

the reactor will slowly become heat ,when the temperature reach around 250 degree celsius, the oil gas will be formed

3) After processed by our technology, the oil gas will go to cooling system for cold liquid oil

the gas which can not become liquid under normal pressure , will be desinged to go back to combustion system through safety device instead of the fuel material to burn the reactor, which is environmental friendly and can save you much energy

4)After finished oil produce ,the temperation of reacor will be down,while,carbon black can be discharged automatically

5) when the temperature fall down to 100 degree celsius,worker could opened the door of reactor to discharge of steel wire

6) Then can start to another batch working

Advantages of waste tyre and plastic recycling machine

1. High oil output rate 45%--55%.

2. Rapid condensers and large cooling area89 square meters,assure u get much more and higher quality oil.

3. Double dust removing device,more environmental protection.

4. Double tail gas recovery,saving energy.

5. Q245R boiler steel plate, high temperature resistance, thickness reaches

14mm—18mm,guarantee 6—8 years service lives.

6. Auto feeder and carbon black elevator,high automation,saving time and labors.

Technical Detail

This is a batch process system.

The waste tyres are fed into the reactor vessel and heated under controlled conditions of temperature and pressure.

The process will bring about molecular restructuring of the rubber under the pyrolysis process as the result; furnace oil in gaseous form is produced along with other gases.

These vaporized gases are passed through heat exchanges, where in the furnace oil is condensed into liquid form.

During the process, carbon black and steel are also generated.

The heat exchanger uses coolant water, as a condensing medium and this water is re-circulated through process.

After-sales service

Installation and Training: We will send one technicians for each set of machine to your company within 10 days when the machine arrives to your factory. The technicians will be charge of guiding your installation, testing the machine and training your workers. The installation period shall be 30 days. You shall pay salary for the technician with 50USD per day and also the round-trip ticket and accommodation.

As we all know, this is a special field, high profit and high risk. So, when you choose a supplier, security will be the most important thing.Except security, technology, quality and oil refining experience are also very important. Since this is a new field, so, no exact rules. In this way, experices and technology will be the key point. As for the quality, it should be worth of your cost.