Home  >  Industrial Supplies  >  Industrial Filtration Equipment  >  Water Filter

Eliminate effectively the suspended objects and particles in the liquid.Can resist higher filtering pressure - details see: https://www.machineto.com/string-wound-flter-cartridge-cotton-or-pp-10230013

STRUCTURE

String wound filter cartridge consists of multi-hole frames wound closely with textile fibers. Diverse kinds of filtering precision can be realized by controlling the winding density. As the outer bore diameter is larger than the inner one, the filter cartridges have a good deep-level filtering capability.

FEATURES

Eliminate effectively the suspended objects and particles in the liquid. With large flow and small pressure loss. With high residual loan and long service life. Can resist higher filtering pressure. Provide different kinds of materials for filter cartridge according to the nature of liquid to be filtered, thus ensuring the good compatibility between them.

MAIN TECHICAL SPECIFICATION

Dimension: Outer diameter Ø65^±2mm Inner diameter 28mm 30mm

Pressure: 0.5MPa

Temperature: 60°C(for polypropylene)

120°C(for stainless steel core, cotton fiber)

FLOW OF FILTER CARTRIDGE

The recommended flow for the filter cartridges in service is shown in the table (L/h for a 250mm filter cartridge)

micron rate (μ m)	Viscosity
	1cs(water)	30cs	60cs	120cs	250cs
0.5	70	60	40	25	-
1	150	90	60	40	-
3	300	120	80	50	-
5	500	170	120	60	45
10	800	300	140	70	60
20	1100	540	220	100	95
30	1200	670	300	150	130
50	1200	880	440	180	160
75	1200	1200	690	230	200
100	1200	1200	750	270	220

Note:

1. The flow of each 250mm filter cartridge should not exceed 1200 L/h, otherwise its precision may be affected.

2. The flows shown in the above table are only the recommended values. The actual flow of the filter cartridge in service may change due to the liquid nature, temperature, the nature of the eliminated particles, the contents of the particles, etc.

3. It is recommended that a new filter cartridge used in the first time should work under a pressure drop of 0.1--0.3 bar, while the final pressure drop for the filter cartridge exchange is set at 2.5 bar. For the filter cartridge whose precision is lower than 10μm, the pressure drop for the filter cartridge exchange had better be set at 1.0--1.5 bar.

APPLICATION

Mainly used for the purification of water treatment in food and drinks, electronic, pharmaceutical, petroleum and chemical industries.