Home  >  Construction Machinery  >  Building Material Machinery  >  Pipe Making Machinery

high strenth steel wire is used to reinforce pe pipe, which is 30-50% cost saving and high quality, widely used in water supply - details see: https://www.machineto.com/steel-reinforced-plastic-pipe-extrusion-machine-10081711

www.goldstone-group.com

We are a professional at

plastic pipe extrusion machine

Designer&Manufacturer

giving a high class pressure plastic pipe extrusion machine Solution.

The polyethylene pipe has been reinforced by wrapping the high strength steel wire in the middle layer. It results the pipe wo rking pressure could easily reach 5Mpa (D≤φ110), 3Mpa (D≤φ200), 2Mpa (D≤φ500) when you use PE80 grade polymer. Goldstone Orient owns full intellectual property rights and patent for pipes as well the pipe making machinery. The new technology ma kes the PE pipe stronger, durable and reduces the material cost definitely.

Goldstone Orient’s know-how of composite process could guarantee that the polyethylene and the reinforced material could be integrated into one well-combined part. The pipe is available used as the pressure pipe systems for water supply, chemical industry, agriculture, construction, petroleum and gas.

Thinking of the different requirements of customers, the extrusion line is flexibility either for standard polyethylene pipe or composite pipe. We aim to bring you more benefit with the minimal investment.

Process

The polyethylene core tube has been produced firstly. Then the pipe will go through the steel wire winding unit to the outside layer extruders. Steel wire bobbins are installed in two round plate, the plate rotate one in clockwise a nd the other in opposite direction. So the wire will wrap on the core tube as a steel me sh. The second extruder coats the adhesive resin on steel for binding of steel and plastic. And then the outer polyethylene layer will cover all steel mesh and core tube to make a finished composite pipe.

Reinforcement

The meshed steel wire located in the middle layer to be the reinforcement. This wire is a kind of high sthrength st eel wire which can provide the excellent pressure against property.

Steel wire, fiberglass, polyester fiber or ot her kinds of high stiffness fiber could be used as the medial reinforcement on the polyethylene pipe. With these strengthening materials, the working pressure resistance of the composite pipe is obviously raised compared with the same wall thickness normal PE pipe.

Binding material

The bond material coated on the steel wire is a kind of high performance modified HDPE adhesive resin. This thermal resin is easily merged with polyethylene; further more, the polar-link-key of the resin provides an excellent bond property with steel atoms (200N/25mm,ASTMD903). This kind of resin has been widely used as boundary material between steel and HDPE in the many big project in China.

Steel-Plastic Binding

For the other composite polyethylene pipes, the most serious bug is that there is no binding interface between steel and PE. So that the steel wire or strip is only mechanically connected with the plastic, the crack will appears at the boundary of the two different materials under the circumstance temperature stress and inner pressure stress. And if the cutting section of pipe is not sealed well, the water can go inside the composite layers between two PE layers, and then break the pipe from the thin single layer under the even low pressure.