Home  >  Metal Processing Machinery  >  Metal & Metallurgy Machinery  >  Metal Straightening Machinery

1.passed ISO9001:2000 quality management system, 2.frequency conversion velocity modulation, 3.simple and convenient, 4.durable - details see: https://www.machineto.com/steel-bar-straightening-cutting-machine-rebar-straightening-machine-rebar-cutting-and-straightening-machine-10166156

Technical parameter:

The maximum wiring diameter	13.5mm
The rolling specification of the diameter	5mm--11mm
The linear speed	0-120m/min
The installation capacity	75kw
The installation length	22m

The product features:

1) It is the first independent research and development for the integrated structure of China, which structure is compact, merely needs small area, which takes 30% of the normal required installation area, the looping winding distance shorted 40% than before, and the production increased 40% than the same kind of power plant. It will use two rolling-mill, and the process is reasonable, it will do not come to the occasion of broken wire, and the quality of the final products will be guaranteed.

2) We will take the International Standard reducer, with strong torque, little noise and quality is the firm durable.

3) The bilateral reel uses hard alloy or wear-resistant material coating.

4) We take the advanced International frequency or electromagnetic techniques, it can save 30% to 40% electricity, the lowest power consumption can come to 8 to 10 degree, the linear speed up to 90m to 120m, it will improve more than 40% of the total production efficiency, it can be better protect the transmission and distribution system and keep the electrical equipment form damage, so it will extend the service life longer and longer.

5) We have independently invented the within the vibration aging process“elimination of pretesting technology”, which filled gaps in this International field and we have declared the patent, we apply this technology for solving the problem which puzzled users due to the intensity of cold-rolled ribbed steel bars to the final products which were too high and the insufficient elongation. This process is easy to operate and the power consumption is merely equivalent to the 40w bulb, which is the most advanced stress relief process in the International field.(Attention: Our device price is not included)

6) Our mill cabinet uses 45# pure steel casting, which will never be cracked. (Attention: other manufacturers use pig iron or ordinary steel, which is easy to crack).We combined the mill and turbine structure as a whole, which takes pure steel casting with no component, the pulling strength is strong and it is wearable and the gearwheel would not break down, it is a durable one.

7) For the trestle part, we use the cast adjustable steel.

8) The straightening machine takes the multi-gear synchronous operation technology, which would bring small scratches to the steel bars; the effect of the straightening is well.

9) To cut off the steel bar, we use our self-invented frequency conversion fast cut-off control system, which advantage is easy to operate, the lower failure rate, less cut error and so on.

10) Technical Process:

The raw material examination unbound the wire rod and convey them into the machine the beginning and the ending, both welding phosphorus removal dry powder (some kinds of cold-rolled ribbed belt steel bar models do not need the 2# rolling mill) straightening measure the length to cut off the final examination and them keep in the warehouse.

11) Taking-up machine. (Optional)