Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Mortar Spray Machines

1.Spraying efficiency is as high as 300-500 square meters per hour, 2.Easily conquer corners, gaps and uneven hard brush - details see: https://www.machineto.com/spraying-equipment-citi-ps20-plunger-type-high-pressure-airless-spraying-machine-10110242

CITI PS20 plunger type high-pressure airless spraying machine

Is suitable for small and medium-sized residential and commercial building coating, coating exterior latex paint, oil paint and parts of anticorrosive coatings

Technical parameters:

• Motor rated power: 1200 w
• Frequency voltage: 220 v, 50 hz
• Maximum pressure: 20 mpa
• Maximum jet flow: 2.0 L/min
• Nozzle diameter: 0.15-0.22 mm
• The best spray distance: 400-600 - mm
• Jet width: 250-500 - mm
• The weight (N.W/G.W) : 20/16 kg

Advantages:

• the application of high efficiency. Spraying efficiency is as high as 300-500 square meters per hour, is a traditional roller construction of more than 10 times
• good surface quality. Spray coating level off, guanghua, dense, no brush marks, roll marks, and particles.
• prolongs the service life of the coating. High-pressure airless spraying can make coating grain deep wall space, cause it is metope form mechanical occlusion, enhance coating adhesion, prolong service life.
• easily conquer corners, gaps and uneven brush
• save paint. Uneven thickness of the brush, usually in 30-250 microns, paint utilization rate is low, and airless spray is easy to get to 30 microns in thickness of coating, the coating of relatively save 20-30%

CITI PS20 plunger type high-pressure airless spraying machine

After completion of painting, must pay attention to the finishing touches.

Cleaning spray equipment. Paint spray paint spray net and solvent alternative coatings, transporting pipeline and spray gun in the washing machine inside coating to spit out the paint is clear so far. Then spray gun to unload, and will be easy to remove the parts one by one remove, clean with solvent. After spraying equipment cleaning, will need to remove the maintenance part is removed, and adopt the appropriate maintenance measures to deal with all the components, main is to maintain good spray gun and nozzle. Finally, the use of sealed residual paint to save, and auxiliary equipment (mixer, detection tools, weighing apparatus, etc.) clean, and arrange deposit.

.

We are looking forward to your attention

If you are interested in any of our products or would like to discuss a custom order,

please feel free to contact us.

Tel:86+514+86599166

Welcome to visit our factory and look forward you cooperation