Home  >  Metal Processing Machinery  >  Metal & Metallurgy Machinery  >  Metal Coating Machinery

1.chrome plating machine for wheels, 2.High-efficiency, low energy consumption, 3.Portable+Simple Po - details see: https://www.machineto.com/spray-plating-machine-sx-5000-hvof-spray-coating-system-for-carbide-alloy-ceramic-and-metallic-layer-10162955

Spray Chrome Plating Machine Sx-5000,Hvof Spray Coating System For Carbide Alloy,Ceramic And Metallic Layer

The introduction of Spray Chrome Plating Machine Sx-5000,Hvof Spray Coating System For Carbide Alloy,Ceramic And Metallic Layer The HVOF (High Velocity Oxygen Fuel) Thermal Spray Process is basically the same as the combustion powder spray process (LVOF) except that this process has been developed to produce extremely high spray velocity. There are a number of HVOF guns which use different methods to achieve high velocity spraying. One method is basically a high pressure water cooled HVOF combustion chamber and long nozzle. Fuel (kerosene, acetylene, propylene and hydrogen) and oxygen are fed into the chamber, combustion produces a hot high pressure flame which is forced down a nozzle increasing its velocity. Powder may be fed axially into the HVOF combustion chamber under high pressure or fed through the side of laval type nozzle where the pressure is lower. Another method uses a simpler system of a high pressure combustion nozzle and air cap. Fuel gas (propane, propylene or hydrogen) and oxygen are supplied at high pressure, combustion occurs outside the nozzle but within an air cap supplied with compressed air. The compressed air pinches and accelerates the flame and acts as a coolant for the HVOF gun. Powder is fed at high pressure axially from the centre of the nozzle.

Tungsten carbide coating equipment,SX-5000 HVOF spray equipment Our HVOF system SX-5000 consists of control cabinet, powder feeding machine, cooling system, spray gun and pipeline system. It’s a compact equipment with the traits of easy-operating, stable working performance, low fuel consumption and high-quality coating.

A.SX-5000 control cabinet of Spray Chrome Plating Machine Sx-5000,Hvof Spray Coating System For Carbide Alloy,Ceramic And Metallic Layer

The control cabinet is equivalent to advanced foreign control system in designing. It’s easy to operate, with the feature of automation-operation during spraying process. You can monitor the system and control the spray gun real-time, and react with system breakdown immediately.

Parameters of SX-5000 control cabinet

Number	Items	Basic Parameter
1	Input power supply	Single phase AC220V,50Hz
2	Input power	300W
3	Control mode	PLC controlling
4	Fuel gas and pressure	Propane 0.65MPa
5	Oxygen pressure	1.1MPa
6	Air pressure	0.8MPa
7	Nitrogen pressure	1.2MPa
8	Hydrogen pressure	0.3---0.4MPa
9	Dimension	600×600×1760mm
10	Weight	130 Kg

B.SX-5000 powder feeding machine of Spray Chrome Plating Machine Sx-5000,Hvof Spray Coating System For Carbide Alloy,Ceramic And Metallic Layer

Powder feeding machine is used to save spraying powder and send them to the spray gun according to technological requirements. It uses nitrogen as feeding gas, and the powder is pulverized into atomization. Then the pulverized powder and nitrogen gas together are sent into spray gun from powder tube. You can use the potentiometer on control cabinet panel to regulate the velocity of feeding powder.

C.SX-5000 cooling system of Spray Chrome Plating Machine Sx-5000,Hvof Spray Coating System For Carbide Alloy,Ceramic And Metallic Layer

D.SX-5000 spray gun of Spray Chrome Plating Machine Sx-5000,Hvof Spray Coating System For Carbide Alloy,Ceramic And Metallic Layer

The spray gun can be operated by manual or fixed to machine hand. It uses oxygen and propane as working gas, and the spraying particles can gain a velocity of ≥450m/s. It can work steadily in a long time.

Other main thermal spraying equipments and service: Tungsten carbide coating equipment,SX-5000 HVOF spray equipment

(1) Vacuum Plasma Spray Machine

(2) Sputter Target Produce Equipment and technology

(3) Precious metal vacuum coating equipment

(4) Cooker magnetism and thermal conduction coating spraying production line

(5) Industrial water chillers

(6) Thermal Spray Coating Services

(7) HVOF spray equipment

(8) Arc spray equipment

(9) Electro Brush Plating Equipment

(10) High power flame spray plastic equipment

Clients visiting our factory

Dear,please kindly contact me with the following question,my professional service will satisfy you!.

1. What kind of products will you want to spray ? --- Could you provide some pictures?

2. Which meterial will you want to use? wire or powder?(zinc wire,alumium wire,stainless wire ,copper wire ,gold wire ,tugesten carbide power ,ceramic powder and so on)

3. Which effect will you want to get ? High temperature resisting ,wear resisting or anticorrosion ,reparing work or others?
4. Do you have any other technical requirements? the more the better.

Contact information, (Name,Ms Emmy)

Items	Details	Items	Details
Cell phone	+86 15913165959	TradeManager	cn1001156364
skype	emmy168888	Yahoo messenger	emmy168888 at Yahoo.com
QQ	1984806933	MSN	emmy168888 at hotmail.com
facebook	emmy168888 at Yahoo.com

remark,at means @

Spray Chrome Plating Machine Sx-5000,Hvof Spray Coating System For Carbide Alloy,Ceramic And Metallic Layer

....