solvent extraction unit www.flexo.co.in

Solvent Recovery - details see: https://www.machineto.com/solvent-extraction-unit-www-flexo-co-in-10229489

Place of Origin:Gujarat India

Brand Name:Flexogroup

Model Number:@ 200 Ltr - RHB

contact supplier for solvent extraction unit www.flexo.co.in

Special Features Solvent recovery unit for photopolymer flexo plates

A. General description:

This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling, can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.

B. Technical information:

Recovery Volume	Power Consume	Diathermic Oil	Machine Dimension Main body	Recovery Rate
200 Liter	380v AC, 10Kw	80 kg	2500mm x 1700mm x 2300mm	85%

C. Operating steps:

After opening the crate, plug in 220 V power, and connect the ground (earth).
Open the lid and fill the tank up to the level with solvent to be recovered (200 L)
Close the lid and tighten it.
Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe(1).
Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is
160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.
Turn on the power switch(15), steam cooling switch(16), heater switch(17) and vacuum pump switch(12).
If you want to be controlled with timer, it depends on the quantity of the chemical, set up
the timer(14) then turn on the switch(13).

D. Important: