Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Hot Air Furnace

1) dry nuts,foodstuff,fruit,seeds,particle feed,medicine product etc, 2)continuous feeding ,automatic temperature control system - details see: https://www.machineto.com/snack-food-drying-machine-food-drying-machine-industrial-food-drying-machine-10292852

snack food drying machine/food drying machine/industrial food drying machine

Introduction

snack food drying machineis widely used for drying all kinds of materials

such as seeds,foodstuff,grain,potato chips,oil plant,nuts etc.

it is mesh belt continous feeding type,suit for all kind of materials in food,chemical,medicine etc.

It is also suitable for materials with high water contents and low dryer temperature.

Technical parameters

Model	Capacity (T/D)	Main power (KW)	Drying length (MM)	Dimension (MM)
LYHG30-1	≥30	97	4000	4800*350*3300
LYHG20-1	≥20	49	2200	3000*350*3300
LYHG15-1	≥15	49	2000	2800*350*3300
LYHG10-1	≥10	49	1600	2400*350*3300

Application

1. The machine is used for drying the piece, tape particle state materials,particle feed,

gourmet powder, fine coconut mash, organic plastics, compound rubber, acrylic

acid fiber, medicine product,

2. It is especially for those materials which the water content rate is high and

the high temperatures is not allowed, such as de-watering vegetable,

herbal medicine of traditional Chinese medicine and others.

3. It is a extension and improvement of hot air circulation drying oven.

4. It is widely used for food industry and chemical area.

Features

1. special moisture elimination blower,make the materials drying evenly.

2. It is flowing and continuous feeding type.

3. Perfect ventilation system make the final products quality very good.

4.stronger pertinency, practicability,high efficiency of energy and good product quality.

5. Heating temperature and running speed is adjustable by changing air-capacity

6. automatic temperature control system can set temperature according to your needs.

7. The materials are uniformly distributed on the mesh belt by the material feeder.

8. Flexible device configuration,Most of air are recycled and energy saves greatly.

9. Unique sub-air device to make the hot air distributed evenly

so that to ensure consistency of product quality

10. Matching many heating source:steam, heat conduction oil, electricity hot air furnace

11. The materials are uniformly distributed on the mesh belt by the material feeder.

12.It is composed of several sections. foreach section, the hot air is circulated separately.

13.The top and low circulation units can be freely equipped according to user's requirements

Working principle

All the fresh or wet materials are evenly displayed on the mesh belt by the material

feeding system. The mesh-belt uses generally 12-60 mesh stainless wire net and it is drawn and moved inside the drier by a transmitting device.

The equipment are composed of several units,for each unit, the hot air is circulated separately.

Some exhausted gas is discharged with a special moisture elimination blower.

The waste gas is controlled through an adjusting value. The hot air passes through the mesh belt

covered with the material from the top to the bottom or from the bottom to the top and this

will complete the transmitting of heat and mass. This process will bring water away from the

material. The mesh belt moving equably, running speed can be easily adjusted. According to

the material temperature,The final products after the drying will fall into the material collector

continuously. The upper and lower circulating units can be freely equipped according to the

users’ requirements

Special technical item

Input raw material moisture	≥55%
Output final products moisture	≤5%
Heating source	steam,heat conduction oil, hot air
hot source temperature	150°C~280°C (machine body inside80°C~140°C)