Home  >  Wood Working Machinery  >  Woodworking Machinery  >  Wood Debarker

wood debarker - details see: https://www.machineto.com/small-wood-barker-10351954

wood debarker

1,The style of groove hopper can feed from one end, and the other brought the assembly line-based operation is expected to overcome power feed, material, sub-working approach disadvantage of the existing drum roller peeling machines need, thereby greatly enhancing the work efficiency.

2, as the teeth on the timber above the impact, not only timber in the machine bed to dosegment cycle exercise, and rotating around its own, so peeling efficiency, on the cold wood, dry wood and hard skinned species also have a better peel net rate.

3, the adaptability of the timber can be of different tree species, diameter, length and shape of the timber section of peeling, as the timber to do rotary segment sports and irregular beating, the concave curved section of the timber can be good contact with ladder-type teeth, so it avoid the ring of length, diameter, curvature as well as raw materials, such as more stringent requirements, therefore, on the bending of the peeling logs net rate is much higher. than other types of models principle

4, due to the huge chassis are fixed, so consuming small, failure rate is low and small repair work, vibration and noise ratio is much lower confidential skinned drum, machine can fall production, even without the base installation, easy to use.

5, more convenient access to the supporting material conveyor system, reducing the operator's labor intensity, so it can greatly improve production efficiency.

Model	SC250	SC150
Diameter of log	50-250mm	30-160mm
Min Length of log	600mm	600mm
Max tortuosity of log	10%	10%
Max Crotch	10%	10%
Knife rotary speed	326r/min	326r/min
Quantity of knife	4	4
Capacity	7m/min	12m/min
Debark rate	≥98%	≥98%
Motor power	7.7KW	6.2kw

tel/fax:0086-371-67670501