Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Hot Air Furnace

Small Sawdust Dryer price, 1.Dry sawdust,small wood chips, 2.300~400kg.h, 3.for pelletizing,briquetting, 4.CE,SGS - details see: https://www.machineto.com/small-sawdust-dryer-for-making-pellets-briquettes-10292683

Sawdustdryer

Introduction:

It issuitable for dryingsensitive material likesawdust,rice hull,milledwheat straw,milled cotton/corn stalksand so on.

It is made up of heat stove, tube, impulse jar, function tube, fan, andcycloneseparator.

It can reduce moisture from40-45%to8-12%.

Fuel for the furnace: wood waste, coal. Waste oil and so on.

For raw materials with heavy humidity which is above 12%, you need to install a Dryer before further pelletizing or briquetting. This Air Current Type Dryer can reduce the humidity of wood materials below 12% per time. The Cost of this Air Current Dryer is much lower than Rotary Dryer.

It is professionally designed for drying different kinds of wood sawdust. It has advantages of low cost, low consumption, high capacity, easy operation and maintainace, etc. In addition, the round places of pipes can be changed to any angle which can save space and solve plant dimension limitation.

(Note:If the moisture of raw materials is more than 45%, the furnace required the bigger, please inform us when ordering.)

Operation Principle:
The whole system consists of fan blower, motor engine, fuel boiler, steel pipe, cyclone and air lock. In this system, wet material is input into hopper by screw feeder. Fuel furnace produces large volume of hot air. The hot air is driven into steel pipes, mixed with wet sawdust and moved through curving pipes and drying chamber by the power of fan blower. Fast moving hot air sustains and is mixed with raw material sent by spiral feeder in the suspending state through the steel pipe; moisture evaporates as the material traverses along the steel pipe and is rendered dry at the discharge end. Humid air is continuously exhausted, thus the material is dried.

Specification:

Model	Centrifugal power	Specification
HGJ-I	4+1.5 kw	Capacity	300-400 kg/h
		Input Materialsize	3mm-5mm
		Air temperature	180°C~250°C
		Consumption of Wood Waste:	10-15kg/h
		Moisture-max	35%
		Dried-max	8-12%
HGJ-II	5.5+1.5 kw	Capacity	500-800
		Input Materialsize	3mm-5mm
		Air temperature	180°C~250°C
		Consumption of Wood Waste	15-20kg/h
		Moisture-max	35-40%
		Dried-max	8-12%
HGJ-III	7.5+1.5 kw	Capacity	800-1000
		Input Materialsize	3mm-5mm
		Air temperature	180°C~250°C
		Consumption of Wood Waste	25-30kg/h
		Moisture-max	35-45%
		Dried-max	8-10%
HGJ-IV	11+1.5 kw	Capacity	1000-1200
		Input Materialsize	3mm-5mm
		Air temperature	180°C~250°C
		Consumption of Wood Waste	30-40kg/h
		Moisture-max	35-50%
		Dried-max	6-10%