Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Welding Equipment  >  Other Welding Equipment

small automatic welding machine, 1.No glue splicing;, 2.for PVC,PE materials;, 3.simple operation. - details see: https://www.machineto.com/small-automatic-welding-machine-10137603

small automatic welding machine

The automatic welding machine is designed to weld plastic materials. The automatic welding machine can weld advertising inkjet fabric, inkjet cloth, light box cloth, thick PVC cloth, mesh cloth, tarpaulin and other PVC, PE, DHPE, LDPE, EVA, Pp plastic materials that can be hot melted.

Specification:

ITEM	PARAMETER
Voltage	220V
Frequency	50-60Hz
Whole Power	800-1600W
Air volume	21m³/h
Air pressure	2500Pa
Temperature range	20-500°C
Welding speed	0.8-10 m/min
Welding thickness	0.2-2mm
Largest welding width	3-4cm
Net weight	15Kg
Outside dimensions	485×285×280 mm
Electric shock protection category	I

ACCESSORIES

1. A 10m power cable.

2. Heater

3. Video CD

4. Manual

5. Wrench

Parts of hot air welding machine

1. Power button 2. Power jack 3. Operation handle Gliding wheel handle

4. Temperate knob 5. Speed regulation knob 6. Wind regulation knob

7. Crank 8.Link cable 9. Wing sheath

10. Heat gun 11.Temperature feedback sensor 12. Nozzle

13. Press wheel 14.Practical temperature display 15. Set temperature Display 16. The buttons turn up temperature 17. The button turns down temperature

Preparation before using the machine

1. You should adjust the temperature and speed according to the thickness of your materials.

2. Fix the cloth on the smooth ground to make sure the best result.

Maintain

1. Clean the nozzle with copper brush.

2. Clean the air inlet with soft bristle brush.

3. Check the power cord and plugs to avoid any mechanical damage

APPLICATION

The automatic welding machine is designed to weld plastic materials. The automatic welding machine can weld advertising inkjet fabric, inkjet cloth, light box cloth, thick PVC cloth, mesh cloth, tarpaulin and other PVC, PE, DHPE, LDPE, EVA, Pp plastic materials that can be hot melted. It is small, light and easy to operate. It is equipped with temperature feedback sensor. The sensor can always monitoring the temperature of the outlet to keep a constant temperature. It uses advanced PID control technology, and adjust the power to make the temperature more constant automatically,the fluctuation is within 5 degrees. This function can make the welding result stronger. It also can avoid leakage. This machine is more suited to fast welding of large roofs.