Home  >  Metal Processing Machinery  >  Metal & Metallurgy Machinery  >  Metal Casting Machinery

slab ccm slab casting machine slab continuous casting macine for produce slab billets from 60mm to 200mm - details see: https://www.machineto.com/slab-ccm-10160987

slab ccm slab casting machine slab continuous casting macine for produce slab billets from 60mm to 200mm

The quotation with main equipment supply range list of R5.25m-1strand 120X120-150X150mm CCM or Slab ccm

No.	Name	Main composition and technical explain	Qty	Unit	Remark
1	150X150 or (120x200mm) mould	Water jacket: carbon steel type The sealing ring of silicon rubber copper tube The width of water seam:4mm Water flow rate:10m/s The material of copper tube:Cu-P Coating of inner wall:Cr The length of copper tube:900mm	1	pc
2	Primary cooling system	The cooling water be connect automatically after mould on place Flow adjustment mode: manual switch for supply water, manual flow adjustment With: pressure meter, butterfly valve, elbow, etc.	1	set
3	Mould oscillation device	Completeleaf springoscillation table( Advance technology,almost nowear and tear ,long working time,top quality) Main parameter Oscillation frequency: 50~205/min Amplitude:2.5~6 mm Oscillation mode:sine Motor:11KW4grade	1	pc
4	Secondary cooling system	Manual water distribution Water distribution tank, gate valve, spring pressure meter, three-way, elbow, etc..	1	set
5	Guide section of secondary cooling	The diameter of down holding roller:φ170 The diameter of up holding roller:φ160 The diameter of both sidesvertical roller φ160	1	set
6	150X150 spray piping	Structure form: arc type stainless steel square pipe Total be divided to 3 sections: secondary cooling section 0 (down mouth of mould), secondary cooling section 1, secondary cooling section 2 Spray mode:5265, water spray	1	batch
7	Withdrawal and straightening machine	No.1, roller,bearing base be cooled with water, AC frequency invert drive The material of roller: alloy forging steel, wear-resistant materials on roller surfacing The roller diameter of turbine warm rod reducer: φ270mm.	1	set
	AC frequency invert motor	YZP112M-4, power 4.0KW Rotary speed: 1500r/min	3	set
	Reducer	1.Cycloid reducer:BLVB2-9-4.0 drive ratioi=11 2. Turbine warm rod reducer DSW29-4.0 drive ratioi=35 3. The reduce box adopt water connection type	3	pc
	Rotary joint	Structure form:built-in type
	Withdrawal and straightening hydraulic cylinder	Diameter of cylinder:125mm, diameter of rod:80mm(oil cylinder)	1	pc
	Off billethydraulic cylinder	Diameter of cylinder:125mm, diameter of rod:80mm(oil cylinder)	1	pc
8	Dummy bar assembly	Structure form: rigid dummy bar, section size:170X150mm, material of dummy head: alloy forging steel	1	set
9	Dummy bar storage device	1.Cycloid reducer:BLVB2-9-4.0 drive ratioi=11 2. Frequency invert motor: 4.0KW	1	set
10	Hydraulic cutter		1	set
10	Roller table before cutting	Structure form: free short roller (bearing base be cooled with water) Diameter of roller:φ219mm Length of roller:320mm	1	set
11	Roller table after cutting and transportation	Structure form: distributary short roller, centralized chain drive (bearing base be cooled with water) Spacing of roller:~760 Diameter of roller:φ219mm Length of roller:320mm Motor:4.0KW Cycloid reducer:1:35	1	set
12	Discharge roller table	Structure form: centralized chain drive (bearing base be cooled with water) Diameter of roller:φ219mm Length of roller:φ320mm Motor:4.0KW Cycloid reducer:1:35	1	set
13	Fixed baffle		1	pc
14	Pusher and cooling bed	Mechanical push motor driver	1	set
15	Main hydraulic control	Motor:7.5KWmanual control	1	set
16	Hydraulic pump	Model:CB-31.5-FL18
17	Electrical control system	PLC 300 automatic control (SIEMENS ) The power of withdrawal and Straightening frequency inverter:15KW The power of oscillation frequency Inverter15KW Low voltage component of control Cabinet:adopt Omron, Schneider.	1	set
18	Steel structure platform		1	set
	Ladle suppot	Ladle moving car support	2	sets
19	Tundish	Capacity: 1-1.5ton	1	set
20	Tundish Car	Mannual adjust system with Motor moving Driving.	1	set
	Totally weight about 70Ton	Above is CCM complete online equipment Supply scope from under ladle to cooling bed.

Continuous casting machine factory introduce

Our company specializes produces metallurgical equipment, continue casting machine, electric furnace. Our company found in 1986, and covers the area over 30 hectares(300000M2 ), has more than 500 employees, among of them there are more than 80 engineers and technicians with 20 senior and 25 intermediate title.

Our company has modern machinery and processing equipment more than 100sets include CNC Gantry Milling Machine, large CNC boring and milling machine, Large CNC cutting machine and so on. We mainly produce electric furnace, continue casting machine, rolling mill, blast furnace, converter and so on, we can do all of design, manufacture, installation, commissioning. Our products were exported to Italy, Philippines, Indonesia, Mongolia, Kazakhstan, Malaysia, Ukraine, Honduras, Iran, Zambia, Nigeria, Myanmar, Vietnam, Syria, Angola, etc. We produce and sale various metallurgical equipments more than 100sets yearly.

Our continue casting machine series produces were awarded "China Top Ten Brands of the well-known continuous casting machine”, and passed the ISO9001: 2008 standard certification. Our metallurgical equipments include electric arc furnace, ladle refining furnace adopt the technology of conductive across arm, tubular water-cooled furnace wall, tubular water-cooled furnace lid and so on with the world advanced level, and equip the PLC control, they are more energy-saving, environmental protection. Our automatic hydraulic cutter which we research and development independent possess reasonable structure, stable performance, and is controlled by PLC, with high cutting precision, fast speed, and reduced waste.