Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Other Construction Machinery

1. High pressure injection epoxy machine, 2. Output pressure:13500psi, 3. professional leakage stoppage and crack strengthening - details see: https://www.machineto.com/sl-500-high-pressure-injection-epoxy-machine-10098952

Protable SL-500 high pressure injection epoxy machine

Easy to carry, output pressure up to 13500psi(max). The medicament can also be injected into pores

Product Description:

SL-500 can generate a working pressure of 15000spi only within 10 seconds.

Portable body, weighing only 7kg, easy to carry & maintain, maximum output pressure up to 13500psi. The fault can be self-maintenance during site operation. The medicament can also be injected into small cracks and pores(larger than 0.01mm).

Location
Leak stoppage & waterproof for basement wall, floor, the second joints, cracks, water seepage, etc. Structure reinforcement for beams, walls.

Usage

1. Before starting, please confirm whether the switch of electric drill is in R (Forward) position or not.
2. Electric drill is not allowed to operate in the mode of hammer drill.
3. Check whether the various parts of screw is off or not. High-pressure pipe and switch valve must be locked when junction.
4. Regulating the speed of electric drill up to the maximum, the hand switch of electric drills at a fixed start, controlling operation in the switch of wire
5. Axis and the pump have hexagonal copper screw cap (17 wrench) with thick Teflon for the leak-proof function. When injecting, if appearing oil spills there, please adjust copper screw cap to the appropriate level.
6. Maximum instant pressure of the machine is 10000spi. When injecting, must consider the pressure degree of water-sealing needle for reducing the risk.
7. When operating epoxy resin, please do it within approved hours of epoxy resin operation, referring to the temperature of epoxy resin. If the temperature of epoxy resin appears to signs of rising, be sure to stop work immediately and use special cleaning agent cleaning the machine, making sure to clean up, indeed.
8. This machine is not allowed to inject the liquid with particles, such as resin mortar.
9. After finishing operation, make sure immediately cleaning the machine by the special cleaning agent for 2 to 3 minutes. After washing, stay the cleaning agent inside of the perfusion machine to avoid medicament residues resulting in jam.
10. Please wear your goggles when injection, avoiding to spray medicament into your eyes.
11. It is not allowed to pour the particles into the cup when pouring (to avoid scratching the pressure pump).

sl-500 injection machine	specification
Net weight	7kg
Maximum output pressure	10000psi
Pressure of starting again	less than 7500psi
Safe range of high-pressure hose	less than 10000psi
Safe range of switch valve	less than 10000psi
Packing size	32*20*49CM
Power	550w/220v

Accessories

Drill: 1 set 550W/220v
High pressure hose: 1 pc 5M
Shut-off value: 1 set
repairing kit: 1 set
Seal set: 1 set
T type wrench: 1 set
Rubber pad: 10 pcs
Zerk: 1 pc
Filter: 1 pc
Material cup: 1 set

Contact Person: Lesley
Mobile:+86-15800973518

Tel: +86-21-51860079-814
Fax: +86-21-6806 0355