Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Welding Equipment  >  Electric Soldering Irons

Outer heating soldering iron ,, 1. Good heating element for stable temperature, 2. Sample is available, 3.Rapidly delivery date - details see: https://www.machineto.com/sj-907-plancha-electrica-ferro-eletrico-soldering-iron-electric-iron-with-long-life-ceramic-inner-heating-core-10135961

Outer heating Electric iron ,

Specification ,

Rated Voltage :110-240V

Rated Power : 30/40/60W

Temperature Range: 300-450 degrees ,

With light

Packing ,

1pc/blister card,

20pcs/inner box

100pcs/carton

57.8*34.5*48.5CM/Carton

N.W.: 13.5KG

G.W.: 15KG

INSTRUCTION ,

1. To prevent serious burns, never touch any part of the iron other than the grip ad never leave the iron unattended while it is plugged in .

2.To prevent fire, keep soldering iron away fom fammable substances and materials in the work area .

Caution ,

1.To prevent fire , use an appropriate sldering iron stand.

2.Keep out of reach of children .

3.Never use the soldering iron if the power cord is damaged as this may result in fire or electric shork .

4.Plugging into an outlet other than the rated input voltage may result in oveheating and fire .

5.To prevent electrio shock , do not use the soldering iron in damp or wet locations or expose it to rain.

6.Be sure that the plug pins are pushed fully into the wall power receptacle . After use , remove te plug from the outlet . Never yank the power cord to disconect it from the receptacle .

7.After use , the tip is still very hot . Allow it to cool down sufficiently before touching the tip or storing the iron . Failure to do so will result in serious burns or fire .

Note ,

1. The first time this iron is used , smoke may be produced . This will not occur during subsequent use.

2.Do not use water on a hot tip to cool it down may cause damage to the heater .

3.Do not use the iron without the tip as the heater maybe be damaged

MAIINTENANCE ,

1.During and after using , tin the tip with solder . The tip may oxidize and become hard to wet if it is not tinned .

2.Once the iron has cooled , remover the tip , tip stopper and heater fixing screw . Remove any oxidized particles from within the heater .

3.If the tip is stuck to the heater , apply machine oil and leave it to half a day .

WARNING ,

.Do not file the long life soldering tip . If wettability is re-duced , clean the tip surface with fine gradesand paper .and tin it with solder .