Home  >  Construction Machinery  >  Building Material Machinery  >  Brick Making Machinery

AAC block production line :, 1.Low energy consumption;, 2.Stable performance;, 3.fully automated production;, 4.Reasonable price - details see: https://www.machineto.com/sinopower-aac-block-production-line-in-shanghai-10076212

SINOPOWER-Autoclaved Aerated Concrete Block Production Line,AAC block production in shanghai!

Brief Introduction

Autoclaved Aerated Concrete(AAC)brick is a light weight, multi-cell new construction material; the features include lower density, heat insulation, possibility, fire and acoustical resistant properties. AAC is made from silicon material(silica sand, or recycled fly ash) and calcium material (lime, cement), mixing with foaming additive (aluminum powder),batching with, the reaction between aluminum and concrete causes microscopic hydrogen bubbles to from, expanding the concrete to about five times its original volume. It is made into the multi-cell silicate product by the processes of molding, pre-curing, cutting, evaporating and curing.

SINOPOWER Equipments for production aaa ,sinopower aac block machine, aerated autoclaved concrete plant, AAC block, sinopower aac production line, aac plant,AAC brick making machine,autoclave aerated concrete block,concrete block machine,light weight block

1) Product weight is according 500kg/m3, 600kg/m3,700kg/m3 to control.

2) annual capacity 50,000-300,000M³.

3) set raw material proportion: cement 6.5%, raw lime 23%, flyash or sand 68%, gypsum 3%, aluminum paste powder 350g/M3.

4) water and material rate 0.631

5) one mould product 3.024M3, 3.456M3, 4.23M3

6) Casting slurry cycle time 5-6 minutes, cut cycle time 5 minutes.

7) casting slurry temperature 38-42 degree

8) body quiet stop. Time is 1.5-2.5housr, temperature 50-90 degree, after quiet stop body strength is 0.15-0.18Mpa

9) Steam curing cycle time, come in and out autoclave about 0.5hour, steam curing cycle time about is 7.5 hours/1.6Mpa, total 8 hours

Capacity Type

ITEM	SP-AAC-5	SP-AAC-10	SP-AAC-15	SP-AAC-20	SP-AAC-30
Capacity, x103m3/year	50	100	150	200	300
Cake Size,m3	4.2x1.2x0.6	4.2x1.2x0.6	4.2x1.5x0.6	4.8x1.2x0.6	6.0x1.2x0.6
Installation Power, kw	600	800	900	1300	1400
ProductionCycle, mould/min	5	6	6	6	6
Workshop Area,m2	3000	3000	3500	4000	5000
Plant Area,m3	20000	20000	25000	30000	35000

Construction Benefits

1.Sound proof

AAC wall has an excellent sound Transmission class (STC) ,rating of 44. Result: Virtually Soundproof Interiors

2.Thermal Insulation

It has highest thermal rating in the industry….R30! Thus provides well insulated interiors, keeping out warm air in summer and cold air in winters.AAC reduces Air conditioning cost by 30%.

3.Earthquake Resistant

Earthquake forces on structure are proportional to the weight of the building, hence AAC plant shows excellent resistant to earthquake forces. Regions of high seismic activity like Japan exclusively use AAC. It has been proven to withstand wind loads of category 5 tropical storms.

The machine is to break up the good quick lime or quartz

sand add ball mill processing must mesh again the special equipment.

Final product Jig

Pouring ferry car in aerated concrete product process is an indispensable ferry vehicle. After cutting porcelain body of steamed raise or wait for pouring mold are all by carrying

transported to a autoclaved and casting line ,will raise the steam after porcelain body transported to a finished product line pile up.

Welcome to visit our factory !

We Can Speak Russian ~~