Home  >  Industrial Supplies  >  Refrigeration & Heat Exchange Equipment  >  Industrial Heater

Silicon carbide heating element SiC heater rods, 1.8-54mm OD,240-4000mm length, 2.Ideal to be used in muffle furnace and kilns - details see: https://www.machineto.com/silicon-carbide-heating-element-sic-heating-rod-10245866

Silicon carbide heating element SiC heating rod

Features:

1. Withstands as high as 1600°C (surface temperature),

2. Generates high heat output per unit surface area, approximately 5-10 times than the output of Nichrome wire,

3. High strength and excellent shock resistance,

4. Heat source is free of noise and air pollution.

They are for element temperaturesup to 1625 C , available in a wide variety of standard sizes and geometries, or in customized designs to meet the specific needs of various processes and equipment.is a kind of non-metal high temperature electric heating element, made of selected super quality green silicon carbide as main materials.

The Advantages of Jinyu Silicon Carbide Heating Elements SiC heating rod

No fuel availability or storage problems
No noxious fuel exhaust to be ducted away
High strength and excellent shock resistance
Economical, dependable, high-quality, excellent after-sale service
One of the highest hot: cold ratios in the industry
Efficiently handle a wide range of products and atmospheres without any protection atmosphere

Please kindly indicate the following dimensions identified in the SiC heating rod :
Shape:ED,DB,U,W,SC,SCR,etc.
Heated Length Diameter (d)
Terminal Diameter (D)
Heated Length (L1)
Terminal Length (L2)
Electric resistance(R)

SiC heating rod products specification:

I. Types: We make Rod type(ED type), Dumbbell type(DB type),U type, W type (Three Phase type), Solid Rod type, Spiral type and 5 piece type (dual hot zone) or according to your requirement.

II. Dia. 8-45mm for all types.

III. Temp: 600-1600 Celsius degrees

IV. ISO9001:2008 quality system authentication

V. Packaging: outer wooden box, cartoon box inside, polyfoam filled to ensure safety

VI. Delivery: one week after receiving the payment

Notes for using and installing the SiC heater:

1. Heater should be protected against damp during storing or installing to ensure the performance of the heater.

2. In order to be sure of well-distributed lod of each and groups, heater should be divided before assembling. The tolerance of the resistance of each one cannot exceed by 10% each other.

3. Heater is hard and brittle, please be careful when assem bling and maintaining so as to avoid damage.

4. When operating the electric furnace at the beginning, the voltage should be increased slowly and cannot be fully loaded at once. Otherwise the larger current will be resulted in the damage of heater.

5. When heater is damaged and need to be changed, the resistance of new ne should follow the increasing resistance. If many are damaged or resistance increased too much, heater should be changed.

6. Silicon Carbide (SIC) heating elements is a non-metal electric heating element made from SiC as its main raw materials. It has some specific properties, such as low expansion coefficient, little deformation, stable chemical property, long service life, easy installation and maintenance, etc.
7. Usage: Silicon Carbide (SIC) heating elements can usually make use for furnace which temperature from 600-1600. It can be directly used in an air atmosphere, without any protection atmosphere. It is extensively used in the fields of metallurgy, ceramics, glass, machinery, analysis test, semiconductor, science & research and so on.