Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Cranes  >  Gantry Cranes

1.Lifting from 100 to 600 t, 2.Top running crane, under slung crane, 3.frequency convers, 4.Professional installation, 5, ISO - details see: https://www.machineto.com/ship-to-shore-gantry-crane-for-stock-yards-10100413

Introduction of Ship to Shore Gantry CraneGantry Cranes offer an economical solution to bridge cranes when the building is inadequate to support a bridge crane or the crane system is to be located outdoors. A box girder gantry crane is a gantry crane that utilizes a "box" configuration in fabricating the girder. This box girder design incorporates a four-sided box with a running surface plate for the hoist trolley attached to the bottom of the box. The advantage of the box girder is that it possesses greater loading capabilities and is able to span greater bridge distances. The crane is generally utilized in pairs with the hoisting mechanism operating on rails attached to the top of each box girder.

Shipyard goliath crane is used for building vessels for shipyard company. As one type of gantry cranes, it has wide range of usage.

The capacity, span, height, traveling and hoisting speed, working classification and usage etc. Basic particulars should be offered.

Applications:

Gantry/Portal/Goliath cranes are widely used in the following applications:
1.Precast yards
2.Shipbuilding
3.Container Handling
4.Construction sites
5.Marble / Granite Industry
6.Mining Maintenance
7.Bridge Construction sites
8.Road Construction Sites
9.Stock yards
10.Scrap yards
11.Railway yards

Design features include:

1. Main girder:
is welded of steel plates, connected by high-strength precision bolt. There are sliding rail for trolley to travel upper the girder which is fixed on outrigger by high-tension precision bolt

2. Outrigger
a). Consist of rigid outrigger and flexible outrigger, all connection points are connected by high-tension bolt
b). The ladder is used by operator to enter into cab or arriving at winch
c). when the span>30m, there need a flexible leg aiming at reducing the lateral thrust the trolley has to the rail when the girder load objects.

3. Travelling mechanism
consist of driving gear box and passive wheel box.

a). The driving gear box supplies power to realize the crane’s travelling.

b). what the difference between driving gear box and passive wheel box is that passive wheel box lacks transmission structure such as dynamo, reducer and a pair of exposed gear

4. Trolley with hoist
is made up of trolley frame, winch and pulley block
a). Trolley frame welded of steel plate is the loading and travelling mechanism of trolley with hoisting
b). Winch is the lifting mechanism of trolley..when it works, wire rope affects the pulley as rising and falling movement, which makes suspended objects lifting and lowering
Warning: wire ropes need to be examined regularly and changed in time if there is a 10% broken wires, loosen wires and wearing down.

5. Cab
a). Glass window through which one can watch overall working condition is installed in the front and two sides of the cab
b). Electric cabinet as a group of independent cabinet , fixed outside of cab is connected by control cable and linkage station which is set up in the cab

6. Electrical system
a). lifting motor, crane travelling motor and hydraulic power motor are included. The whole electrical system is controlled by PLC.
b). two ways to operate the crane: cab operating and remote controlling.
c). Electric components are imported from Schneider in Germany

7. Platform
platform is installed in order to maintain the crane, the protective guard is added to protect the safety of servicemen.

Product specification					250t×60m	300t×108m	600t×60m
Working class					A5
Capacity	Common lifting			t	250	200	600
	Turning over			t	200	200	400
Span				m	60	108	60
Hoisting height				m	48	70	Above rail 40 Below rail 5
Upper trolley		Capacity		t	100×2	100×2	200×2
		Hoisting speed		m/min	0.5-5-10	0.5-5-10	0.4-4-8
		Traveling speed			1~28.5	3~30	1~25
Lower trolley		Capacity	Main hook	t	100	150	300
			Sub hook		20	20	32
		Hoisting speed	Main hook	m/min	0.5-5-10	0.5-5-10	0.4-4-8
			Sub hook		10	10	10
		Traveling speed			1~26.5	3~30	1~25
Maintenance hoist		Capacity		t	5	5	5
		Hoisting speed		m/min	8	8	8
		Trolley speed			20	20	20
		Rotating speed		r/min	0.9	0.9	0.9
Gantry speed				m/min	1~26.5	3~30	1~25
Max. wheel load				kN	200	450	430
Power source					380V / 10kV; 50Hz; 3 Phase or on request

Our successful Cases:

Fujian East Sea Shipbuilding Machinery

Taizhou Mapleleaf Shipyard

Pls kindly tell us the following information before sending us the enquiry,so that we can help choose the most suitable material handling for you:

1.Lifting capacity

2.lifting height(from the ground to hoist hook)

3.Span(rail center to rail center)

4.Power supply(to match with the motor)

5.Main usage

6.Need cantilever or not?If need,how long?