Home  >  Industrial Supplies  >  Refrigeration & Heat Exchange Equipment  >  Heat Exchanger

1.shell and tube heat exchanger, 2.Can be customerized, 3.Work Pressure:0.2~3.1MPa, 4.Fin space:1.2~3.5mm - details see: https://www.machineto.com/shell-and-tube-heat-exchanger-at-air-cooled-and-also-water-cooled-chiller-10241797

We are a professionalheat exchanger, condenser, evaporator and heat pumpmanufacturer in China.

Our products as the following:

1.Refrigerator condenser/evaporators

2.Freezer condenser.evaporators

3.Condensing unit condenser /evaporators

4.and other refregeration condenser/evaporators

Top-Reated industrial copper fin type tube heat exchanger

Feature:

1. Type Dry Expansion Evaporator applied at Air Cooled and also Water Cooled Chiller with fluid made cool in the form of water , chemical , brine ( anti frezz fluid ) and also sea- water .

2.different alternative condensing fans available: shaded pole or outer rotor fan motor.

3. Cooler fluid from water Cooling Tower , river water or sea- water . Gas Type Cooler serve the purpose of Heat Recovery at system refrigeration as hot water producer / Hot Water Generator .

4.All units can operate on various types Refrigerant : R 22 ; R 134a ; R 404A ; R 407C ;

5. The application of equipments : - Refrigeration Evaporator - DX Evaporator - Refrigeration Condenser - Absorption Generator - Absorption Condenser - Absorption Cooler - Absorption Evaporator - Cooler - Ammonia Condenser

6. we can supply products as per customized samples or drawing.

7.producing procedure: tube bending, punching fin, expanding, digressing, drying, welding, leakage test, bending, inspection, packing.

8. they are often easy to service, particularly with models where a floating tube bundle (where the tube plates are not welded tothe outer shell) is available. Can also be used on fixed tube sheet heat exchangers.

9.Type Shell and Tube Condenser applied at Packaged Air Conditioner , Water Cooled Chiller , Heat Pump , Heat Recovery and also Marine Refrigeration and Air Condition .

Advantages

1.Less expensive as compared to other type coolers.

2.Can be used in systems with a wide range operating temperatures and pressures.

3.Pressure drop across a shell and tube heat exchangers is less.

4.Tube leaks are easily located and plugged since pressure test is comparatively easy.

5.Tubular coolers in refrigeration system can act as receiver also.

6.Using sacrificial anodes protects the whole cooling system against corrosion.

7.Extended heat transfer surfaces (fins) can be used to enhance heat transfer.

8.Cleaning and repair are relatively straightforward, because the equipment can be dismantled for this purpose

If you have do not which model is suitable for you please tell me the below information .Then we can help you and save time for you.

heat exchanger basic data:

Item	unit	hot side		cold side
Fluid( name and composition)
Volume flow rate	m3/h
Operating temperature (in/out)	°C	In	Out	In	Out
Pressure drop (design/allow)	Mpa	n/a		n/a
Operating pressur	Mpa	n/a		n/a
Heat exchanged	kw	n/a
Any requirements about mounting space?

Our productshave been exported to Europe,USA, Japan and Middle east etc.

For further information please contact me

Tel:+86 21 35324169*207

Fax: +86 21 35324166

Skype:carrie.wu190