Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Gear Cutting Machines

1.Energy Conservation 2.Environmental Protection 3.Small occupation area 4. energy saving. - details see: https://www.machineto.com/shaft-induction-heating-equipment-10126028

shaft IGBT induction heating equipment,shaft IGBT induction heating furnace,igbt induction heating machine,igbt induction furnace

Application:

1. Heat shaping

A, All kinds of standard parts, fastener and other machinery accessories, hardware too, straight shank twist drill are hot rolling. The round steel with diameter 16mm can extrusioned within 3-5seconds heating.

B, Metal material heating annealing, convenience to stretch. Modeling embossing Etc. such as steel pipe stretch, elbow, iron wire, steel wire heating make pin, stainless steel products annealing, stretch, expanding.

3.Heat treatment

Hardening, Annealing, Tempering for Surface, inner bore, local, integral of All kinds of hardware tools, motor-power, hydraulic pressure, pneumatic element, Auto Accessories, air Accessories machinery technology component, Etc. Such as, hammer, knife, scissors, pliers and all kinds of axis, cam wheel, chain wheel, gear wheel, valve, ball pin , Etc. and hardening of large size machine tool guideways and Ductile cast iron.

4.Welding, Welding head, lathe tool, reamer, milling cutter, drill bits, and stainless steel bottom of the pot, such as the composite of different materials welding, and welding the greater volume and frequency should be reduced more to welding tools as an example, such as:

20mmcutter following the application of high-frequency 50-100 KHZ
20-30mm above the tool to apply high-frequency 10-50 KHZ, super audio
30 mm above the tool applies to 1-8 KHZIF

5,Metal melting

Specialized in melting gold and silver.

Features:

1.Adopt Germany's Siemen's powerIGBT invertercontrol and unique technology.

2.Adjustable heat insulating power of the course,time will help to improve the quality of the heating and heating repetitive,easy to simpliy workers.

3.simple to install, connect to the three-phase 380V power supply,water, the water can be, to be completed in minutes.

4.Covers an area of very small,easy to operate, a few to minutes to the institute.

5.in particular security,lower than the voltage of 36V,from high-voltage electric shock hazard.

6. Heating efficiency up to 90% more than in high frequency vacuum tube machines 70% standby power under almost no electricity, and 24 hours continuous use.

7.Disassembly of an induction loop free, easy to replace,ultral-fast heating significantly reduce the rate of oxidation of the workpiece deformation.

8.Replace by gas of other dangerous gases on open flame heating production, more in line with the national fire safety regulation.

Specification:

Model: WH-VI-120
Output power: 120KW
Input voltage: three phase 380V 50-60HZ
Oscillation frequency :15-25KHZ
Size: main 650 × 480 × 1440mm
At 500 × 800 × 580mm