servodriver ac for Printing and Robot industry

1' 3-phrase 380V series, 2' PLC Function, 3' Modbus Interfaces, 4' USB PC Interfaces, 5' easy operation and installation - details see: https://www.machineto.com/servodriver-ac-for-printing-and-robot-industry-10235155
Place of Origin:Hubei China (Mainland)Brand Name:MaxsineModel Number:EP3-GH170Motor Type:AC Motor
Output power:3 phase 380VACRated output Power::5kwControl Mode:Position, Speed, TorqueRated output current::17A
Feedback Mode:2500 line incremental encoder or 17 bit absolute encoderProtection Level:IP20Regenerative Braking:Built-in/built-outCertification:ISO
Control method:Vector ControlSpecial Functions:ZRN ,Gain Switch,Sustaining Modbus Agreement  
servodriver ac for Printing and Robot industry
contact supplier for servodriver ac for Printing and Robot industry


Product Introduction

Product models

GL series:GL1A0/GL3A0/GL7A5/GL120/GL160/GL190/GL240

GH series:GH3A5/GH5A4/GH8A5/GH130/GH170

Designed and produced by market demand, EP3 series Multifunctional AC Servo Driver adopts advanced control algorithm and intelligent power module (IPM), which could realize precise digital control on torque speed and position.Designed on the basis of EP2 series, functions of USB Interfaces , sustaining Modbus agreement and internal simple PLC are added. This series includes 3phrase 220V series and 3hrase 380V series. The feedback mode is 2500 line incremental encoder or 17 bit absolute encoder, which could support 16 bit current sampling and 16 bit external analogue sampling accuracy. Thus, it owns advantages of strong overload capacity, fast response, easy operation without setting driver code.The selected exquisite operation panel could do the realtime monitor and adjust the operating situation of motors. Designed on the reliability requirement of domestic industrial environment, it helps to make the stability of productsreliable.

Introduction of EP3 Model

Introduction of EP3 Size

Note: EP3 series has different appearance depend on different models. Please see the details on related use manual.

Detailed parameter of EP3 series

ModelGL 1A0GL 3A0GL 7A5GL 120GL 160GL 190GL 240GH3A5GH 5A4GH 8A5GH 130GH 170
Rated output Power(kW)0.10.411.523511.5235
Rated output current(A)137.5121619243.55.48.51317
Input powerMain supply1-phase 220VAC -15%~+10% 50/60Hz3-phase 220VAC -15%
+10% 50/60Hz		3-phase 380VAC -15%~+10% 50/60Hz
Control supply1-phase 220VAC-15%~+10% 50/60Hz24VDC±15% ≥1.5A
EnvironmentTemperatureWorking:0°C~40°C Storing:-40°C~50°C
HumidityWorking:40%~80%(non condensing) Storing:under 93%(non condensing )
Atmospheric Pressure86kPa~106 kPa
Protection LevelIP20
Control Modevector control
Regenerative BrakingBuilt-in/built-outbuilt-out
Feedback Mode2500 line incremental encoder or 17 bit absolute encoder
Control ModePosition, speed, torque, position/ speed,speed/torque,position/torque
Digital input5 Programmable input terminals(Optical Isolation)
Digital Output3 Programmable input terminals(Optical Isolation)
PositionInput Frequencydifferential input:≤500kHz(kpps), single-ended input:≤200kHz(kpps)
instruction modePulse+Signal,CCW Pulse/CW Pulse, Two-phase A/ orthogonal Pulse
Electronic Gear Ratio1~32767/1~32767
SpeedSimulation command input-10V~+10V,input impedance10kΩ
Instructions Acceleration And DecelerationParameters set
Instructions sourceanalog,Internal speed instructions
TorqueSimulation command input-10V~+10V,input impedance10kΩ
Speed restrictionParameters set
Instructions sourceanalog,Internal torque instructions
Special FunctionsZRN,Gain switch,mechanical resonance wave trap, sustaining Modbus agreement
Surveillance FunctionRevolving Speed,Current Position,Positional Deviation,Motor Torque,Motor Current,Instructions Pulse Frequency etc.
Defensive functionOverspeed,Overvoltage,Overcurrent,Overload,Abnormal brake,Abnormal Encoder,out of tolerance etc.
FeatureSpeed Frequency Response≥300Hz
Speed Fluctuation Rate<±0.03%(load 0~100%); <±0.02%(power-15% +10%)
Speed Ratio3.513889

Application machinery

1' numerical control machine tools

2' textile machinery

3' packaging machines

4' printing machines

5' cuttingmachine

6' marking machines

7' industrial robots

8' many other industrial automation fields.

Pictures

servodriver ac for Printing and Robot industry
Packaging Detail:Foam+Plastic bag+Carton,standard export special packaging
Delivery Detail:5~60 days depend on customers' demand

Related Product for servodriver ac for Printing and Robot industry