Home  >  Raw Material Processing Machinery  >  Rubber Raw Material Machinery

pyrolysis oil, 1.long lifetime and easy operation, 2 .Energy saving, high efficiency, 3 .low power consumption,50% oil yield - details see: https://www.machineto.com/scrap-tyre-pyrolysis-oil-with-steel-and-carbon-black-10340488

Working process:

firstly: two or three worker put the raw material into the furnace, seal the feed inlet .then burn the coal /wood in the botton of the furnace ,or be heated by electricity directly and the bottom of the reactor will slowly heat the waste raw material .when the temperature reach of 250°C 280°C,we will get the crude oil ,the oil gas will be produced untill the temperature reach to200C- 300°C.

and then the oil gas will be separate to light and heavy component by separate divice.the light component will be entre to the condenser and meanwhile the residues will be discharged automatically in succession.after the condenser ,the liquefied part will be crude oil ,and the waste gas (it is mean that that part can not be liquified )will be return to heating supply system for burning by the way of combustion gas purification system.

Equipment technology parameter

Project	Content
Equipment model	LN-2200*6000	LN-2600*6000	LN-2800*6000
Material	Waste rubber/tyre	Waste rubber/tyre	Waste rubber/tyre
24 hours’ process loads	8-10ton material	10-12ton material	12-15ton material
24 hours’ Oil produce mass	4.5ton Bunker oil	5.4ton Bunker oil	6.8ton Bunker oil
Coolant conditions	Water	Water	Water
Main engine size (long×width )	6000*2200	6000*2600	6000×2800