Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Drying Equipments  >  Drying Oven

Sawdust Dryer Drying Wood Chips, is widely used for drying materials with size less than 3mm, such as sawdust, corn stalk dust - details see: https://www.machineto.com/sawdust-dryer-drying-wood-chips-biomass-powder-10289643

Sawdust Dryer Drying Wood Chips

Introduction:

Our Sawdust Dryer Drying Wood Chips specializes in reducing the material moisture rate to 8-12% for high utilization of materials and perfect briquette shape making.

And also it advantages in high output, low energy consumption, easy operation

and good appearance.

Structure and work principle:

1) Sawdust Dryer Drying Wood Chips is equipped one fuel boiler, inlet, steel pipe, exhaust blower (fan), cyclone.

2) First, the wet materials are put into the hopper. Then the fuel boiler generates

hot air which mixes with wet materials and then is sucked into the pipes by the

exhaust blower (fan) quickly. And then hot air is flowing and going though the

curving pipes and buffer (drying chamber) of dryer, thus wet materials is

finished to dry, and the dried materials are expelled out by the exhaust blower (fan).

3) Sawdust Dryer Drying Wood Chips reduces the moisture to 8-12% with the advantages of lower cost consumption and high efficiency.

Technical Details:

1. HGJ-I and HGJ-II Sawdust Dryer Drying Wood Chips are suitable to process materials which moisture content between 20%-25%. And it can reduce the moisture to 8%-12% one drying time.

2. HGJ-III Sawdust Dryer Drying Wood Chips is suitable to process materials which moisture content between 35%-50%.It can reduce the humidity to 8%-12% one drying time.

Main Technical Data:

Model	Capacity (kg/h)	Power (kw)	Max dia of input(mm)	Weight(kg)
HGJ-I Sawdust Dryer Drying Wood Chips	250--400	5.5	3	1200
HGJ-II Sawdust Dryer Drying Wood Chips	400--600	7.5	3	1700
HGJ-III Sawdust Pipe Dryer	800--1000	5.5	3	1800

HGJ-I

HGJ-II