Home  >  Construction Machinery  >  Building Material Machinery  >  Brick Making Machinery

sand AAC plant, 1.higher pass-rate 98%, 2.chain and gear transmission, 3.ISO9001:2008, 4.full automatic - details see: https://www.machineto.com/sand-aac-plant-10076007

We introduce the advanced technology of domestic and international, high pass-rate of production .

of sand AAC plant

• feature of sand AAC plant:fly ash Autoclave Aerated Concrete Block (sand AAC Block) is the light and porous building material.It has the advantages of Light Weight, Keeping Temperature, Heat Resistant, Fireproof, High Intensity, Good Sound Insulation and Machinability, Conveniently Mechanized Construction, etc.
• size of sand AAC plant:sand AAC Block can be made into many different size of blocks (for example: 600× 200× 100, 600×200× 125, 80× 80× 180, 240× 115× 53, etc), widely used for industry building and common house building.they will completely replace the Clay Bricks and Normal Concrete Blocks in building construction.

2. Conception of sand AAC plant

The density of common concrete block is around 1600-2400kg/m3, but fly ash aac Block is 500kg/m3, 600kg/m3, 700kg/m3. It has not the big grain, mainly made from silicon material, for example: Fly ash, sand, cement, quick lime, gypsum and so on.

In brief, there are 5 steps to make fly ash AAC Block,

1. first, preparing raw material;

2.Second, mixing the measured raw material to make slurry and pouring;

3.Third, pre-ageing and cutting the green block body;

4. Fourth, grouping the cut block and autoclaving;

5.Fifth, packing the autoclaved block and transporting out of plant.

sand AAC plant Suitable materials

Fly ash, sand, lime, gypsum, cement, water, aluminum powder and aluminum paste

Each cubic meter consumption and Content proportion of Fly ash aac block raw material

raw material	Content proportion	Each cubic meter consumption
fly ash	70%	350kg
cement	13.8%	25-30kg
lime	13.8%	140-150kg
gypsum	2.96%	15kg
aluminize powder	micro	0.4kg

Each cubic meter consumption and Content proportion of sand aac block raw material

raw material	Content proportion	Each cubic meter consumption
granulated substance	69.2%	350kg
cement	13.8%	70kg
lime	13.8%	70kg
gypsum	2.96%	15kg
aluminize powder	micro	0.4kg

3.sand AAC plant Production Engineering

1. First, dose and match measured raw materials

2. After distributing, feed raw material into pouring mixer to make slurry

3. Through thoroughly mixing, the slurry is poured to mould

4. After pre-curing with a certain temperature & time, the block would reach certain hardness prepare for cutting

5. Tilting hoister would turn over 90 degree of mould

6. Then open the mould & separate it from block, take the block with side plate with cutting cart

7. The block then be cut through the cutter firstly of two vertical sides of block

8. Secondly the horizontal cutting

9. Finally the vertical cutting

10. After cutting, the block is hanged to trolley with side plate by semi-finished product hoister

11. Organizing the cut blocks and put them into autoclave

12. Hardening the blocks under certain temperature and pressure

13. Take finished products out of autoclave

14. The finished product hoister takes the finished product to stock shield

15. Packed for loading

16. The side plate return back by side plate roller

17. Side plate would be organized with open mould

18. Clean the mould and preparing for next pouring

19. Steel bars processing line for slab production

4.the complete equipments list of AAC plant

Note: For our company id continuously developing technology, technological parameters can be changed without notice; technical parameters shall prevail to drawing.

5.The Area and investment of sand AAC plant

Item	Capacity(per year)	Factory Area(m²)	Total Investment( $ )
1	30000	5940	480000
2.	50000	7920	635000
3.	100000	13200	794000

Note:For our company id continuously developing technology, technological parameters can be changed without notice, technical parameters shall prevail to drawing.

6.the usage site of different sand aac plant

7.the clients visit the workshop

AAC Plant with Following Annual Capacity:

20,000 m3AAC Block Plant; 60,000 m3 AAC Block Plant;

50,000 m3AAC Block Plant; 60,000 m3 AAC Block Plant;

100,000 m3AAC Block Plant; 150,000 m3 AAC Block Plant;

200,000 m3AAC Block Plant; 250,000 m3 AAC Block Plant;

300,000 m3AAC Block Plant; 350,000 m3 AAC Block Plant;

1.Our experinces:more than 20 years machinery produce experience.Built more than 100 AAC blocks production line .

2.our materials used:best cabon steel from Taigang,Wugang and Angang.

3.Our After sales:excellence ,purchasing department,Guiding,Installation,after sales service team.

4.Our scale:3 factories in China 5.Our Quality:has a strict quality control and process flow.

We use Chain,gear and little hydraulic pressure to instead of Roller screw to increase the driving stability and reducing the scrap. The height of machine is lower than others. it reduces the height of workshop and cost. During the cutting, our machine adopts slow-fast –slow style to cut the cake which can protect the cake and make it perfect.any more details ,pls contact me .