Home  >  Construction Machinery  >  Building Material Machinery  >  Brick Making Machinery

Capacity: 50,000m3-300,000m3, Semi/full automation, Germany technology - details see: https://www.machineto.com/sand-aac-block-brick-production-line-machinery-10075978

We produce 4.2m, 4.8m, and 6m series AAC production line machinery for Middle East, Africa and South-east of Asia, etc. The Whole set of Aerated-Concrete equipment we produced have become universal products for domestic new or existing aerated factories. AAC blocks will become dominate wall materials in future.

Application Scope: AAC block producing

Feature

The operation of our plant is simple and pratical.

Waste materials and water can be recycled during operation process, it is environment-friendly.

The whole equipment has higher degree of automation.

The final products are high in precision, qualified product rate ≥ 98%.

Our AAC plant has good cost performance.

Production Process:

1.Stocking and supplying raw materials

2.Processing raw materials

3.Batching and pouring

4.Cutting

5.Grouping and maintaining process

6.Steaming in autoclaves

7.Final products packaging

Product Principle
1) Technology Orientation
Production and application of aerated concrete has a history more than 40 years in China. Viewing from technology point, high quality products can use 3mm special sand slurry technology to meet the construction requests and 50% energy saving goals. (When mortar joint is less than 3mm, take thermal conductivity coefficient of wall as 1; when mortar joint is more than 3mm, take thermal conductivity coefficient of wall as 1.5). Based on the history of the aerated concrete development, only high quality products can bring a prosperous market. Thus, the technology orientation of this scheme is high-class products according to China Standard GB11968-2006.
2) Production Capacity
In our factory, the main production capacity is annually 50,000m3, 100,000m3, 150,000m3, 200,000m3, 300,000m3 etc. The product is aerated concrete block which is light in weight. Also, there is a reservation of plate in consideration of users' need.
3) Product Specification
Products conform to requirement of 04~07 grade blocks stated in GB11968-2006.
General Specifications of Aerated Concrete Blocks

Service

1.Production Line Design.
Including: drawing of plant working process , drawings of land construction, drawings of power working, drawings of driving force for working, drawings of anti-dust, drawings of water supply and drainage, and drawing of air pipeline construction.
2.Technical Guidance of Building Factory
Including: consultation of facility, Equipment installation guide, constitution the production preparation, etc.
3.Providing the technical information of setting up factory
Including: part of the factory management system, all posts accountability of production line, process rules, safety rules, setting a quota of staff and posts, pre-production tools directory, laboratory instruments, product catalogs, and test methods.

Contract Information:
Tel: 86-519-89883750

Fax: 86-519-89883760

Mobile: 86-18961187950