Home  >  Metal Processing Machinery  >  Metal & Metallurgy Machinery  >  Industrial Furnace

1. Professional manufacture for intermediate frequency electric melting furnace., 2 . Good service, 3 . Low price - details see: https://www.machineto.com/sale-5t-3000kw-electric-furnace-10159158

The steel structure ( frame structure and cylinder structure ) is adopted to large capacity electric furnace which is equipped with magnetic yoke. The yoke will shield and reduce magnet leakage and prevent furnace body from over-heating, thus will improve efficiency and sustain the induction coil at the same time. Such will enhance the strength and reduce noise

This kind of furnace contains:

Intermediate frequency power supply 1set

Intermediate frequency melting furnace body

Hydraulic system

Furnace water cooling cable

The connecting copper bar etc....

3000 kw -5 t steel shell furnace series resonance medium frequency melting system(1 power supply cabinet and a steel furnace body configuration)

Technical parameters and system overview

KGCL-5T-3000-600×2-0.3S POWER SUPPLY:

Our company production of power supply for more than 2 t, generally USES the combination of 6 delta - Y ac input, the rectifier through the reactor, and then the filter capacitor and the output to the inverter circuits (both LC filter circuit).

KP silicon controlled rectifier circuit in the switch function only, is not pressure regulating function. Normal working process of the thyristor conduction, all have a failure all shut off.

You must be equipped with S11 - a M type above 3150 kva transformer, the input voltage for 10 kv - delta, 3 phase output for delta - 575 - v, 6 Y phase

3000 kw, 300 hz series resonant power supply contains a set of rectifier, contained in a set of SCR series inverter. For a 5 t furnace power supply.

From the transformer to the power supply cabinet into the line of the construction shall be the responsibility of the user.

USES:

Mainly used in smelting steel, iron, copper, aluminum and alloy, high efficiency and power saving with fusion effect is good, metal components uniform, burning less, temperature rise is fast and the temperature is easy to control and so on characteristics, suitable for all kinds of metal melting occasion.

Advantages:

Constant power output, melting speed faster, more obvious energy saving effect.

Zero frequency sweep software start, more can adapt to the requirements of the frequent start.

Comprehensive protection measures, such as over current, over voltage, current limiting, metering, water shortage, lack of equal protection, to ensure that melting speed premise, make the equipment operation and reliable.

The operation is simple, applicable to all kinds of casting process.

If you have interested in our products, you can send us your present situation and your requirements, we can according to your request made for you for good quantity intermediate frequency electric induction melting furnace