Salable Wood Sawdust machine

wood sawdust machine, 1.more fuction,include nail wood;, 2.low noise, 3.compact structure, 4.environmental - details see: https://www.machineto.com/salable-wood-sawdust-machine-10343178

Condition:New	Place of Origin:Henan China (Mainland)	Brand Name:Ruiguang	Model Number:RGWS-089
After-sales Service Provided:Engineers available to service machinery overseas	Name:sawdust machine	power(kw):18.5	Out put(kg/h):450-1000
Fineness (mush):4.0-20	Inlet widthheight:4015	The number of Harmmer/ blades:20	Weight(kg):1500
Area(m2):5	Fan (fan can separate):One fan	Usage:sawdust machine

Wood Sawdust Machine

1.Detail description of wood sawdust machine

a.The wood sawdust machine can crush various materials, such as branch ,pine wood, log, waste wood and so on.

b.This wood sawdust machine has the advantages of less investment, low energy consumption, high productivity, easy to maintenance and so on.

c.The raw materials can be crushed into fine sawdust by this wood sawdust machine at one time, the whole machine uses one motor, simple structure, stable working condition.

d.The sawdust size can be addjusted between 3mm and 22mm

e.it can crush nail in wood

Feature of wood sawdust machine

1).enery-saving
2).low noise
3).compact structure
4).environmental

5). CE

3. Application scope of wood sawdust machine
It can be used for producing charcoal,briquette press, blocking making, pellet, sawdust press etc, the raw material
we can choose corn/cotton etc straw,wood sawdust, sugarcane, chipper etc,

4.Parameter of wood sawdust machine

model	mesh	Area(m2)	power(kw)	capacity(t/h)	size(m)
RGC400	4-20	5	18.5	0.45-1.	1.85×1.2 × 0.92
RGC600	4-20	7	30	1.0-1.8	2.6 × 1.6 × 1.25
RGC800	4-20	9	45	1.8-3.0	2.9 × 2.1 × 1.5
RGC1000	4-20	11	55	3.0-4.5	3.2 × 2.5 × 1.75
RGC1200	4-20	13	75	4.5-6.0	3.5 × 2.29 × 2.0

5.Operating rules for wood sawdust machine

1). After installation, start the blower, check the direction it runs and see if the suction at the material inlet is normal.

2). Tie up a bag whose both ends are open around the outlet of the dust catcher.

3).Feed the material to be dried to the hopper. Remove large grain in the material before drying, which will benefit drying speed.

4). Put fuel into the furnace and light it, start the blower. When the air temprature at the outlet of the blower get to 100°C, begin feeding and drying.

5).Large piece of the material at dregs-outlet must be removed, which is favourable to feeding.

6.Cautions of wood sawdust machine

1). The machine must be grounded well.

2).The exhaust vent of the dust catcher must not be indoor, a flue pipe should be made to exhaust the gas outdoor, and the chimney must be at least 500mm higher than the roof.

3.) The large grins of material should not put into the hopper.

4).When material does not get in easily, check the vane of the blower, remove the dust sticking to it.

7. Image of wood sawdust machine

any questions about wood sawdust machine contact me .