Home  >  Pharmaceutical & Chemical Product Machinery  >  Pharmaceutical Machinery  >  Capsule Filling Machines

1. ABS engineering plastics, 2. Easy to operation and cleaning, 3. Small size, 4. Cheap cost - details see: https://www.machineto.com/s-200-abs-capsule-filling-device-10303815

Product Features:

Plate the latest version of the S -200 precision capsule (capsule, capsule filling filling plate plate) by our factory recently made precision

mould injection molding, machining center after the test, was welcomed by the user's wide acclaim and

dealers. The latest version of the S-200 precision capsule plate arranged plate, hats, middle plate,

plate, pressure powder and powder panels, made of organic glass materials not only include all the

advantages, and has more advantages than organic glass:

1: non-toxic environmentally friendly materials, non-toxic odorless (plexiglass more or less pungent

odor).

2: The smooth rounded edges and holes capsules, feel comfortable (plexiglass corners have saw

marks, white side, there will be a feeling of assassination feel and unsightly).

3: The board as a whole a cap made of sturdy unbreakable (plexiglass panel consists of a cap capsule

hole drilled plexiglass late plus a thin plexiglass plate, in the middle of the length of the capsule and

plexiglass thickness pad piece paving, so is likely to result in the use of thin plexiglass plate cracked

damaged).

4: plates with holes that a thickness of 6.5MM, more strong and difficult to deform (plexiglass only 5MM).

5: Arrange disc capsules arranged holes radian fit, deep enough, arrange capsules capsules very

easy to get into the extra hole arranged in the capsule is very easy to pour out (plexiglass extra hole in

the capsule are arranged relatively easy to pour out).

6: The mold injection molding, the overall accuracy is good (plexiglass is positioned before the first

punch is made with a drill, tools and operations due to the reasons for bias).

7: Pressure plate with powder injection molding mold, ejector plate spacing and pitch capsules to complete one, with the same material handle, easy to use. (Plexiglass plate is pressed powder after the plug hole in the plexiglass plate made of aluminum rod, aluminum would shake, when the pressure will damage the capsules are not careful,

the handle stamped by the iron plating, feel bad when used the course of time and will rust).

8: The product is durable without deformation (plexiglass easy to turn yellow, deformed, poorly

preserved can not be reused).

Products:

1. Guide plate arranged 1pc (four sides of the border),

2. Cap plate 1pc,

3. Plates 1pc,

4. Intermediate plate 1pc (single layer),

5. Spatulas plate 1pc (for the powder distributed uniformly inside the capsule body),

6. Pressed powder board block 1pc(for compacting powder capsules, to increase the filling amount of the powder), with handle.

Model: 0 # capsule

Specifications: S-200 (a fill 200 capsules per time)

Uses: 0 # capsule powder filling (filling)

Material: ABS

Powder filling rate: 100%

Lock pass rate: ≥ 100%

Hole accuracy : R0.05mm

Filling precision: W ± 5%

Capacity :2000-4000 / hour

Length and width: 30 * 17cm

Weight: 1.8kg

Packed weight: 2.5kg