RUIMA Trimming Margin Machine and surface planer wood machinery bandsaws
Place of Origin:Guangdong China (Mainland) | Brand Name:RUIMA | Model Number:MJ-4003 | Max. Working Width:400mm |
Min. Working Width:30mm | Max. Working Height:30mm | Min. Working Height:8mm | Max. Working Length:2000mm |
Min. Working Length:300mm | Machine Dimension:750*850*650 mm | Feeding Power:0.375kw | Shaft motor Power:5.5kw |
Total Power:5.875kw(7.9HP) |
1.Introduction
1*Trimming margin machine is widely use on the wooden material process and laminted wood, Special for the timber slitting or burst.
2*It is sectional type for the working table, customer can adjust the width according to the needs.
3* its easy to control and high efficiency.
4* Checking by infrared ray, Rubber roller chain for feeding (for different wood)
2.Technical Parameter
Trimming Margin Machine | ||||||
Specifications | MJ-4003 | MJ-4003N | MJ-4005 | |||
Min. working width | 30mm | 30mm | 30mm | |||
Max. working width | 400mm | 400mm | 400mm | |||
Min. working length | 300mm | 300mm | 300mm | |||
Max. working length | 2000mm | 2000mm | 2000mm | |||
Min. working height | 8mm | 6mm | 8mm | |||
Max. working height | 30mm | 30mm | 50mm | |||
Feeding power | 0.375kw | 0.375kw | 0.375kw | |||
spindle power | 5.5kw | 5.5kw | 7.5kw | |||
Total power | 5.875kw(7.9HP) | 5.875kw(7.9HP) | 7.875kw(7.9HP) | |||
Speed control | 9m/minute | 6m/minute | 3.6m/minute | |||
Dimension | 750*850*650mm | 750*850*650mm | 750*850*650mm | |||
Saw blade | 180*2.4*20T*35H | 185*2.6k*22T*35H | 190*2.6K*24T*35H | |||
Net weight | 200kg | 200kg | 250kg |
3.Application
This machine is widely use on the wooden material process and laminted wood,special for the timber slitting or burst.
It is sectional type for the working table,customer can adjust the width according to the needs,its easy to control and high efficiency,Checking by infrared ray, rubber roller chain for feeding(for different wood)
4.Working picture
Feeding and outing system
Steel wheel feeding (full active) low wood waste.
laser infrared calibration
cutting system
Feeding: adjust the speed, wood size initiatively,
change feed speed, protect saw blade and motor
5.Auxiliary Assembly
1,Bearing: Adopt the famous international brand, Clean heating assembly.Main spindle with high flexible degree and long life.
2,Saw blade: Use the high quality import saw blades, heat-resisting,wear-resisting,never deformation.
3,Switch: Intelligent operation interface,easy to operation.
Cutting Solution Project
We provide solutions project for Log cutting, As the picture show below, we provide a log cutting into slats solutions project.
A:Log Multi-rip Saw Machine B:Working Table
C:Plank Multi Saw Machine D:Clear Margin Saw Machine
6.Factory & Company picture
Packaging Detail:Be packed in wooden cases or foam with per set. |
Delivery Detail:25 days after order. |