Home  >  Material Handling Equipments & Parts  >  Material Handling Equipment  >  Conveyors

Features:, 1.High strength, 2.Belt width (mm): 250 - 2,100, 3.Tensile strength 10~20Mpa, 4)Fabric: NN-100 - NN-500 - details see: https://www.machineto.com/rubber-nn-conveyor-belt-10197359

Usage:

Suitable for coal mine, constructures, factories, ports, docks, long distance, high strength, large volume of use.

Varieties:

According to cover the performance can be divided into: ordinary type, smoldering, heat-resistant, wear-resistant, and resistant to. Cold type, acid type, oil type varieties.

FEATURE:

A:Nylon is one of the best quality synthetic fibers that the rubber industry
uses nowadays. The nylon canvas is woven by nylon fibers both in warp and
in weft, it is most widely used fabric in rubber industry, and its outstanding
merits are high abrasion resistance, high tensile strength and good fatigue
resistance.

B:Conveyor belts with nylon canvas inside have the characteristics
of thin belt body, high tensile strength, good shock resistance, good
through ability, high adhesion between plies, splendid flexibility and long
working life.

C:Nylon conveyor belts are suitable for medium, long-distance and
heavy-load transportation of materials, widely used in mining, metallurgical
industry and architectural industry and ports.

The detail data for NN Coneyor belt as following form:

Specification and technical data of multi-ply nylon conveyor belt Fabric type Fabric structure Fabric spece Ply Thickness (mm/p) N/mm) Strength series (mm) Cover thickness Width (mm) Length (mm) Warp Weft 2ply 3ply 4ply 5ply 6ply Upper Upper Nylon (NN) Nylon (N) Nylon (N) NN-100 0.75 200 300 400 500 600 1.5-12 0-4.5 400-2500 ≤300 NN-150 0.8 300 450 600 750 900 NN-200 0.9 400 600 800 1000 1200 500-2500 NN-250 1.15 500 750 1000 1250 1500 NN-300 1.25 0 900 1200 1500 1800 NN-400 1.45 0 0 1600 2000 2400 800-2500 NN-500 1.55 0 0 2000 2500 3000 Adhesion and elongation of the belt Project Between Plies N/mm N/mm Between rubber and carcass Elongation 0.8-1.5mm >1.5mm Longitudinal elongation at break % ≥ Longitudinal elongation at reference load % ≤ All the sample average ,N/mm,≥ 4.5 3.2 3.5 All samples minimum peak,N/mm,≥ 3.9 2.4 2.9 10 4 Note: All samples shall not exceed the peak values 20N/mm Conver properties of the belts Conver grade Tensile strength ≥ Elongation ≥ Abrasion ≤ Change Rate of tensile strengh and elong after aging Mpa Kgf/cm2 % mm3 % Strong designated-type working conditions(H) 24 240 450 120 -25+25 Strong wear working conditions(D) 18 180 400 100 -25+25 General working conditions Light(L) 15 150 350 200 -25+25

PHOTO SHOW: