Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Hot Air Furnace

Rotary Dryer:, 1.capacity:5~7t/h, 2.power:7.5kw, 3.material can be sawdust,slag,clay limestone,chemical, 4.low consumption - details see: https://www.machineto.com/rotary-drum-dryer-for-slag-coal-wood-bagasse-by-hongji-10293314

RotaryDrumDryerfor Slag, coal, wood, bagasse by HONGJI

Rotary dryer is used to dry slag, clay, limestone, It is mainly used for cement, chemical, metallurgical, building materials etc

Rotary dryer mainly consist of rotary body, raw material feeding plate, driving and supporting device, etc. Its principle of operation: the raw material plate which is arranged reasonably with changeable angles in order, throws moisture materials into the rotary cylinder. Then water will be separated from the materials by hot air-flow and changed into vapour to be discharged into the atmosphere. Then the materials would be dryed.

rotary dryer’s operating principle:

Dry and wet material from the belt conveyor or bucket elevator to the hopper,

then by feeding machine of hopper through charging pipe into the feed side. Feeding pipeline’s slope than the natural material, in order to materials smoothly into dry containers.Drier with the horizontal cylinder is a slightly into tilted rotating cylinder.Material from high end to join, heat body by low-end enter, with material into counter-current contact, also have heat body and materials together and flow into the barrel.with the cylinder rotate by gravity materials to a run on the bottom of the end. Wet materials in the cylinder body forward movement process, directly or indirectly got heat body heat, make wet materials to dry, then the discharge end by the belt conveyor or screw conveyor sent. In the cylinder body wall with copy plate, It is the function of the material copied up and planted,make the material and the airflow contact surface increases to improve the drying rate and to promote material progress. Heat-carrierisgenerally divided into hot air and flue gas. After the heat-carrier by the dryer, generally need the cyclone to trap the material of the gas down. through the bag filter or wet dust collector and then put emissions,if you want to reduce dust content of exhaust gas.

Specifications:

Model	HGT-1000 x 10	HGT-1200 x 12	HGT-1500 x 14
Power	4kw	7.5kw	11kw
Capacity	1~3ton/h	5~7ton/h	8~10ton/h
Diameter of feed materials	0-200*240 mm	0-200*240 mm	0-200*240 mm
Working Temperature	stove 300°C	stove 300°C	300°C
Consumption of wood waste	20-30kg/h	20-30 kg/h	40-50 kg/h
Overall size	Φ1m, length 10 m	Φ1.2m,length 15 m	Φ2.2m, length 28 m
Weight	6000kg	10000 kg	18000 kg