Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Other Drying Equipment

The drier suitable for drying in chemical industry,dyestuff,pharmaceutical,foodstuff,metallurgy industry.Drying equipment/drier. - details see: https://www.machineto.com/rolling-scratch-board-dryer-10293604

Features Drying equipment dryer

Taking the steam or oil as the heat source. The heated area is big. The heat efficiency is high. Heating is uniform.
The drying speed and rate is big. The heat transmission for the wet materials on the cylinder wall is from the inside to the outside and uniform. The temperature gradient is big so as to make that the film surface keeps the stronger evaporation strength.
The drying time is short, some 10 - 15s. The machine is suitable for the heat sensitive materials.
The operation is simple. And the maintenance is easy.

Descriptions

The operation principle of XDT series cylinder type drying machine is to let that the materials in liquid or thick liquid state form the thin film on the surface of the cylinder heated through steam or other thermal carrier. For one turn of the cylinder, the film will complete the drying and the product will be removed through the scraper. The exposed surface of the cylinder will contact the materials again to form the film and carry out the drying.

Application

XDT series cylinder type drying machine is widely used for the drying, tablet making and other operation procedures of the sticky and paste state materials. The machine has been used in the food, chemical, medicine and other industries with good performances.

Technical Parameters

specification	Φ800×1600	Φ1000×2000	Φ1200×2000	Φ1400×2400	Φ1600×2400
pressure of work MPa	≤0.6	≤0.6	≤0.6	≤0.6	≤0.6
power of main motor kw	3	4	4	5.5	7.5
area of heat transfer m2	4	6.2	7.5	10.5	12
revolution of barrelr/min	0.5-5	0.5-5	0.5-5	0.5-5	0.5-5
brief introduction to work	steam,heat conducting oil	steam,heat conducting oil	steam,heat conducting oil	steam,heat conducting oil	steam,heat conducting oil
form to feed material	top or bottom	top or bottom	top or bottom	top or bottom	top or bottom