Home  >  Metal Processing Machinery  >  Metal & Metallurgy Machinery  >  Other Metal & Metallurgy Machinery

1>ISO and CE quality assurance, 2>light weight, 3>long life time:10years, 4>convenient application - details see: https://www.machineto.com/roll-forming-machine-10168956

Introduction
Model WLFM28-207-828 colored steel tile forming machine consists of uncoiler and its base, coil sheet guiding equipment, film covered device, roll forming system, pressing equipment, post-cutting equipment, hydraulic station, controlling system, supporter table

Working Flow
Decoiling the Sheet—→Sheet Guiding—→Film Covering—→Roll Forming—→Measure Lengh —→ Cutting the Panel—→Panels to the Supporter.

Technical Parameters:

Material		Colored steel sheet / galvanized steel sheet
Thickness of coil sheet		0.3-0.7mm
Quantity of Stands		about 18 groups
Material of cutting blade		Cr12
Main motor power		7.5kw
Hydraulic station power		3 kw
Hydraulic station pressure		10-12Mpa
Forming speed		10--12m/min
Controlling system		PLC,model S7-200,Siemens
Index error of length		36m
The largest camber action		10m+-2mm
Voltage		380V 3 phase 60Hz or according to buyer's requirement
Total weight		10MTS

Material of Main Equipment

Roller Material	high grade No.45 forged steel, plated hard chrome on the surface of roller with thickness 0.05mm
Active Shaft Material	high grade No.45 carbon wrought steel at Φ 75mm.
Cutter Blade	Cr12 mould steel with quenched treatment.
Electric Elements	Control system with PLC model S7-200,Siemins.transducer with ABB control panel with TP170, Siemens. It can input 10sets of spec at one time
Oil Tank Model	CB-E310

Component and Function
1. Sheet guiding equipment: Using guiding equipment of leader sliding block style. The width and the left or right position can be adjusted only by adjusting the leader, then the sliding block can realize left or right movement.
2. Mainframe Transmission: Transfer the main motor power to the rollers through chains and sprockets, and also transfer the coil sheet.
3. Roll forming system: The main frame of machine is welded separately and the outside wall is connected by screw after being roto-blasted on the surface. The rollers are surface-chrome plated after being machined by the exact machine tool..

Designated use
1. Some final products for Automobile.
2. Some final products for Building, such as for Roofing / Ceiling / Wall materials, and dry wall (track and stud) material.
3. Some final products for Gate-Panel, Guard-Panel and sound insulation

Terms:

1. Delivery: in stock

2. Package:Export Standard package in container

3. Payment:TT(30% by TT down payment ,balance by T/T before shipment or irrevocable L/C at sight)

4. Validity: good for 30days