Home  >  Metal Processing Machinery  >  Metal & Metallurgy Machinery  >  Metal Moulding Machinery  >  Wire Drawing Machines

1w1-4/550 11kw,10ton/24h, Drum diameter:550mm, Inlet/outlet wire dia:6.5-4.0-2mm, Weight of single block: 2000kg - details see: https://www.machineto.com/rod-wire-drawing-machines-10167691

Pulley Type Continuous Wire Drawing Machine

pulley type continuous wire drawing machine

wire drawing machine,China wire drawing machined,wire drawing machinery,fine wire drawing machine,drawing machine,wire machine,wire-drawing machine,wire drawer,drawing machinery,wire machinery,water tank drawing machine,line drawing machine,rod wire drawing machines,wire making machine,wire drawing,stainless steel wire drawing machine,copper wire drawing machine,wet wire drawing machine,straight wire drawing machine,straight type wire drawing machine,pulley typoe continuous wire drawing machine

straight wire drawing machine

fine wire drawing machine

Structure:he drawing equipment consists of main reduction box, die casing, wheel frame, wire brace and electeical control system. The spinning drawing blocks are driven by JZT or Y series motor, with gear coupling runs changeful gears to reduce speed. The drawing blocks are verticaly fixed in sealed box body. The gear are lubricated with oil.

In order to lower residual heat on the surface of the block, the cooling means is installed in interwall of the block.
The machine runs with carwl or linkage. The safety halt gear is installed by the position of operating block.

pulley type continuous wir drawing machine

Major Technical Parameter

Specifictions Model	800	560	450	350
dia of takeup wheel (mm)	800	560	450	350
Draw die	1--8 dies	1--6 dies	1--7 dies	1--6 dies
Max.incoming diameter (mm)	10--14	6.5	3.4	2.5
Outgoing diameter (mm)	6	2	1	0.75
Total compressibili (%)		78--88.5	78	78
Average partial compressibility (%)	25	30	20	21
Drawing speed (m/m)	/	245	346	200
Motor power (kw)	132	60-80	30-45	18.5-22
Overall dimensionssss (mm)	9730x3340 x2020	1700x1150 x1750	1520x810 x1700	1400x800 x1500
Weight (kg)	4500	2000	1500	1000

Water-Trunk Type Wire Drawing Machine

straight wire drawing machine

We can supply two types of water trunk type drawing machine, one for medium size and another for fine wires. The cylinder is tower wheel type that enables high speed, efficiency and small occupation of space.

The main technical parameters are as follows: A. Feeding wire diameter: φ8-6.8MM
B. Outgoing wire diameter : 3.0-2.6MM
C. Drawing times: 8 Die
D. Electric motor power: 75-90kW
E. Speed :320 - 360M / min
F. Speed fixing wheel diameter : φ360MM
G. Productivity per hour: 1000-1200kg / n
H. Annual output : 4000T
I. Occupied land area: 15000 x 2500 × 2000 (length x width x height)

The main technical parameters:

Specifications	Reel diameter mm	Wire drawing time	Feeding wire strength MPa	Maximum feeding wire diameter mm	Maximum outgoing wire diameter mm	Speed m/s	Motor power kw
550	550	11	≤1100	5.50	2.802.20	4	90132
450	450	11	≤1100	3.60	1.601.40	6	7590
350	350	12	≤1100	3.00	1.00	7	3745
300	300	18	≤1050	2.60	0.8	8	3037

wire drawing machine,China wire drawing machined,wire drawing machinery,fine wire drawing machine,drawing machine,wire machine,wire-drawing machine,wire drawer,drawing machinery,wire machinery,water tank drawing machine,line drawing machine,rod wire drawing machines,wire making machine,wire drawing,stainless steel wire drawing machine,copper wire drawing machine,wet wire drawing machine,straight wire drawing machine,straight type wire drawing machine,pulley typoe continuous wire drawing machine