Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Other Mining Machines

roadheader, 1: EBH120 Cantilever Roadheader, 2: Cutting Hardness f 8-10, 3: Hydraulic system ,strong power - details see: https://www.machineto.com/roadheader-10318808

roadheader

Main feature:

1: compact structure , body is low , with a low center of of gravity , easy to operate , and operate steadily,. Cutting head is driven by electric motor , and it can be horizontal or vertical axle form arbitrary . Horizontal axle cutter head size can be Φ750x1350 and Φ800x1500 such two standards , it has good cutting speed when cut medium hard coal rock .

2: The difference between Our road header and traditional ones lies in : cutting arm adpots two joints from , and the two joints are connected by axis pin , and two cylinders control it go up and down , one cylinder control it turn horizontal .

Our road header has such following advantages

1: Because the arm is narrow , the driver's vision is wide , big and small arms coordinate with each other when working , it Increase the flexibility of cutting arm .

2: When cutting forearm bending , the distance between cutting head and apron is 180mm as cutter head is in the middle position , but when it is at two sides position , the distance is only 100mm , so it reduce the distance between cutting head and apron greatly .

3: Because the rotation of cutting head , the coal is retrojected to apron , assistant coaling result is better , it resolve conflict between coal falling fast and coaling slow .

Application

Cantilever selective roadheader is suitable to tunneling in drift section of 8-22m2 , or Half coal crag tunnel .

in accordance with international and local regulations. All our roadheaders are available with a longitudinal or transversal cutterhead, whichever is best suited for your project's geological conditions.

Max tunnelling height	3.89m
Max positioning tunnelling width	5.56m
Tunneling section form	Random
Economic cutting section	8-22m2
grade ability	±16°
One way cutting coal rock compression	≤60MPa
Dimension (L*W*H)	9.1x2.1x1.6m
Production capacity	0.5m3/min
Ground clearance	250mm
Dinting of the Cut Head	250mm
Installed power	195kw
Total weight	40t
Tractive force	170KN
Cutter head shape	Horizontal Axis type
Cutter head size ( dia*width)	Φ700x1350 Φ800x1500
Cutting head Rotating speed	74r/min
Cutter pick form	pickaxe
Cutter pick quantity	62 units
Cutting motor rated power	120KW(132kw)
Loading capacity	180m3/h
Loading motor rated pressure	16MPa
Conveyor motor rated pressure	16MPa
Spade Board Width	2.5m
Planer gear speed	35r/min
Conveyor form	double-strand scraping plate
Chain speed	1.2m/s
Walking speed	3.2/6.4 m/min
Ground pressure	0.14MPa
Crawler(caterpillar) width	500mm
Brake system	friction clutch
Pump power	75KW
Rated pressure	16MPa
Fuel tank capacity	600L
Outer water spray working pressure	≥1.5MPa
Supply voltage	AC1140V/660V
Gross power	215KW
Operation box protection type	Explosion proof