Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Road Machinery  >  Road Marking Removers

Alloy Knife Type Road Marking Remover, Depth adjuster & Pressure adjuster, Emergency stop device, Protective device - details see: https://www.machineto.com/road-marking-remover-10121345

DY-RMR Alloy Knife Type Road Marking Remover

Description of DY-RMR Road Marking Remover

DY-RMR Alloy Knife Type Road Marking Removeris professionally used to clear away the broken, stained and wrong marking lines. The engine drives the removal cutter to rotate at high speed to clear away the old lines. The gasoline engine and the anti-abrasion tungsten alloy cutter are both imported with speedy and excellent performance. It is easy to operate and maintain.

Main Feature DY-RMR Road Marking Remover

1.Driving engine makes sure the higher removel speed and and the labor and time are saved.

2.More humanized design ensure the operator more comfortable.

3.Removed road surface is much cleaner than common remover.

Technical Parameter of DY-RMR Road Marking Remover

No.	Item	Spec.
1	Engine	America Briggs & Stratton 10.5HP air-cooled Gasoline Engine, and the throttle is controlled by handle brake.
2	Removal Width	Removal width can up to 620mm when left-right operation, 180mm when forward or back off
3	Removal Cutter	Tungsten alloy, the 24 teeth cutter is used forremoving thermoplastic line, the 48 teeth is mainly used forremoving cold plastic line.
4	Depth Adjuster	Adopt accurate pitch, control the depth accurately as required
5	Pressure Adjuster	Fixed with depth dial; adjust the pressure of removal cutter to road surface. According to the conditions of road surface and different kinds of paint, adjust the removal pressure, the max pressure can insert into road surface
6	Protective Device	Automatic clutch makes the cutter automatic clutch with removal shaft according to the engine speed and the conditions of road surface, which makes sure the high quality removal, fewer damages and extends service life
7	Water Device(Optional)	Greatly reduces the dust produced on job site.
8	Rubber Bush	Fixed Around the cutter can prevent dust and fragment during construction,makes sure the safe of operator
9	Emergency Stop Device	Equipped with emergency stop switch, which can stop the machine in short time.
10	Parking device	Convenient foot control parking system makes the machine in safety condition in any time.
11	Operation	Pull, push, wave type operation
12	Size & Weight	1240*780*1100mm 230kg
13	Optional system	cleaner, roll booster

For more information on our new product,

please check our website,www.road-marking-machine.com