Reliable quality wood sawdust dryer/hot air dryer for pellet,Briquette charcoal production

Sawdust dryer:, 1.the power:15kw, 2. Long durablity, 3.energy saving, 4.Easy to operate and maintance - details see: https://www.machineto.com/reliable-quality-wood-sawdust-dryer-hot-air-dryer-for-pellet-briquette-charcoal-production-10292878

Condition:New	Type:Hot Air Furnace	Place of Origin:Henan China (Mainland)	Brand Name:Chuangde
Model Number:HJ-IIIV	Voltage:220V/380V	Power(W):15kw	Dimension(LWH):12.524 m
Weight:2880/3120kg	Certification:CE &ISO	Warranty:1 year	After-sales Service Provided:Engineers available to service machinery overseas
Capacity:1000-1200kg/h	Working temperature:stove300℃/pipes 180-200℃	Consumption of the wood waste:25-35kg/h	The size of the raw material:1-5mm
the moisrure of the sawdust:8-12%	The main parts:round/square stove, pipes	Color:as you like	Packing size:13.59m3
Operation:easy	Moisture of the raw material:20-60%

Introdution to wood Sawdust Dryer/hot air dryer

This dryer is suitable for drying materials of moisture 30-60%. The dryer is equipped with two fuel boilers, inlet, steel pipe, exhaust blower (fan), air lock and cyclone. Wet materials are input into the hopper. The fuel boiler generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly. And then hot air is flowing and going though the curving pipes and buffer (drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are discharged from the outlet with air lock. This wood dryer reduces the moisture to 8-12% with the advantages of lower cost consumption and high efficiency.

Working principle of the wood sawdust dryer/hot air dryer

In the flash dryer, high-speed ot air stream sustain raw material in the suspending state, then the material is dried. Since air stream speed is very high, and mateirls suspending in air stream, the heat transfter surface between air and raw mateiral is large, so the heat transfer rate is high.

Material requirement wood sawdust dryer/hot air dryer

sensitive particular material as sawdust,rice hull,milled wheat straw,ground wood chip,wood bits, etc. Size: less than 3*5mm

Advantage of the wood sawdust dryer/hot air dryer

1.Hot airflow dryer is our newly developed and advanced drying equipment which also called pipleline dryer.

2. This hot airflow dryer adopts twice cieculate heating system.

3. This hot airflow dryer shows the features of automatic feeding, complete mix of air and materials, strong drying strength, lower dust and bigger drying capacity.

4.Moisture in the raw mateials of less than 50% can be drying one time to meet the requirement for coal bar production, which greatly reduced the labor intensity compared with commonly used drier.

Technical data of the wood sawdust dryer/hot air dryer

Model: HJ-II

Power: 7.5kw

Capacity: 500-600kg/h

Diameter of feed materials: 1-5 mm

Working Temperature: Stove300°C / Pipes180-200°C

Consumption of wood waste:15-20kg/h

Weight: 2880/3080kg

Overall size: 9*2*4 m

Packing size: 1.23*1.24*1.73=2.64m3/1.5*1.06*1.1=1.749M3/2.44*1.22*2.1=6.25m3

Model	Power(KW)	Capacity(kg/h)	Dia. of materials	Gross Weight(kg)
HJ-I	4	100-300	<1mm & < 5mm	1100
HJ-II	7.5+0.75+0.75	400-600	<1mm & < 5mm	2260
HJ-III	11+0.75+0.75	700-800	<1mm & < 5mm	3080
HJ-IV	15+0.75+0.75	900-1000	<1mm & < 5mm	3120