Reliable quality and Eupean standard LB1500 ASPHALT MIXING PLANT

The equipment use craftwork of forcible mix, intermittent discharge - details see: https://www.machineto.com/reliable-quality-and-eupean-standard-lb1500-asphalt-mixing-plant-10115341

Place of Origin:Guangdong China (Mainland)

Brand Name:RP

Model Number:LB1500

Reliable quality and Eupean standard LB1500 ASPHALT MIXING PLANT

1. Brief Introduction

LB1500 ASPHALT MIXING PLANT is designed and developed by our company, using Japan Niigata NP1500 ASPHALT MIXING PLANT technique. It's main performance can get to congener product, the idea of design consider the situation of a country on china sufficiently, with higher cost performance. It is fit to produce asphalt material of surface and base. The equipment use craftwork of forcible mix, intermittent discharge. Various of sandstone material and powder lot, bitumen can be weighed by electronic scale, controlled by industrial computer, easy operation, reliable performance.

2. Construction Characteristic

1) Hopper adjusts quantity of material by leather belt in control room.

2) Optimization designed Turn—down rig of dryer which has a logical placement is either to improve efficiency or to avoid overheat of aggregate.

3) Hot material elevator use loop chain transmission, life is long, convenient maintenance, fine reliability.

4) Screening plant which uses middle four layers circular screen of single axle is high in efficiency, not easily blocked. Vibrancy bearing which has a cooler fan solves middle vibrancy bearing overheat problem. Screening plant reduces influence of noise on complete appliance by second shock absorption. Consequently decreasing influence on measuring system. The body of screen is airproofed in the cover to avoid pollution of dust, the cover is locked by spring device, easily disassembled.

5) Door of Storage bin is single one which is big gap, avoiding block and leakage of material.

6) Door of measuring bin is in compaction and reliable, also avoiding block and leakage of material, shaft sleeve of bin is made of graphite, dry lubrication, no needing lubricant at work.

7) Bitumen is nebulized and injected into the mixer coercively, mixed equality, time is reduced accordingly.

8) Shaft tip of mixer uses chevron seal, avoiding leakage of material.

9) Lining board in the mixer is high intension bearing material, after abration of blade, it’s direction can be changed, then using it newly.

10) Discharge door of mixer is form of push and pull, discharge hole is big, time of discharge is short. Dependability is good.

11) Dust collection system is a two grades system, the first is cyclone collection, after collection the filler goes into the hot material elevator and recycled. The second grade is wet collection, which is made up of two water pumps drenching the material. Efficiency of dust collection is improved very strongly. Bag collection is used in the second collection.

12) Complete appliance is controlled by industrial computer, easy to study and understand, precision is high, Dependability is good.