Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Chemical Storage Equipment

FRP tank,storage tank, 1 Size:1-1500M3, 2 Material:stainless steel.FRP, 3 Light weight,anti-corrosion - details see: https://www.machineto.com/reinforced-fiber-glass-water-tank-10282973

Reinforced fiber glass water tank

FRP tanks are suitable for use in the following applications.

1) Potable Water Storage (drinking water)

2) Rainwater Harvesting & Storage

3) Emergency Water Storage

4) Pump Chambers

5) Effluent/Acid and alkali solution treatment & Storage

6)hospital,buildings,building site, school and other place

Features of FRP TANK

1. Super Hygienic

In compliance with WRAS (Water Regulation Advisory Scheme) making with the quality of material which is hygienic passes a taste, a smell and a poisonous etc. 5 kind test being a water tank, was verified.

2. The capacity can be designed according to customer need.

Panels various sized can make the below tanks that utilize the most horizontal and perpendicular space and also can be erected from small capacity tank to huge tank.

Our company offers panel tanks from 0.25M3 up to a maximum of 1,500M3

3. Safety of Bottom Panel for Water Pressure

The convex panel can be the water pressure created by filling the tank seals the joint preventing leakage.

In other type tanks, water pressure can loosen the joint breaking the seal and allowing the stored water leak out.

4. Prevents Leakage

The joint are sealed with a special sealing tape.

It maintains soft itself and adhesives even at low temperature.

5. Complete Drainage

The convex bottoms with a concave drain panel system make sure complete and fast drainage.

It’s very useful to take a maintenance inside of water tank.

Components of FRP TANK

1. Panel.

1-1. Design of the Panel

SMC panel designed to be most safety panel shape through long technology.

Our research and development team designed the tank to the highest standards, utilizing the new technologies, to ensure that a proper multipurpose tank could be manufactured.

1-2. Water Quality Testing

With independent testing and certification by WRAS in British Our Products have passed a stringent verification process, ensuring that you are purchasing tanks manufactured to the highest standards.

1-3. Hydrostatic Pressure Testing.

SMC panel shall not burst, crack or leakage to test pressure of 2.4bar

In accordance with SS245:1995 specification for grp reinforced polyester sectional water tank .

1-4. Panel Dimensions.

Dimension (mm)	thickness	Shape
1,000 x 1,000	5,8,10,12,14,16,18,20mm	Concave
1,000 x 500	5,8,10,12,14,16,18,20mm	Concave
500 x 500	5,8,10,12,14,16,18,20mm	Concave

Manhole Panel / 1,000 x 1,000 (Dia Ø780)

Manhole cover has double seal structure and completely block from insects, worms.

2. Joints

- Sealant : PVC Foam Tape, Rubber syndicate

- Bolts , Nuts : Inside(SS304,SS316), Outside(HDG / Hot Dip Galvanized)

- Bolt cap : Prevention for Outside Bolt Rust

3. Reinforcement

- Internal Tie Rods : Stainless Steel(SS304 or SS316 Grade)

- External Reinforcing : Structural Steel Galvanized

- Roof Support : uPVC, Coated Steel

- Type 1 : External System

- Type 2 : Internal System with Tie rods

4. Accessories

- Internal ladder : GRP - External ladder : HDG (Hot Dip Galvanized )

- Air Vent - Water Level Indicators : Clean tub with aluminum cover.

- Nozzles : Brass , PVC , GRP

- Bolt cap: Prevention for Outside Bolt rust