Regenerative adsorption air dryer for air compressors
Place of Origin:Shanghai China (Mainland) | Brand Name:HX | Model Number:150 HD | Type:Air Dryer |
Product:Regenerative adsorption air dryer for air compressors | Air consumption rate:≤14.5% | Control method:PLC,easy to operate | Treatment capacity:17 M3 /min |
Design pressure capacity:1.0Mpa - 10.0 Mpa | System pressure drop:<0.021Mpa | Air outlet dewpoint:-70°C (PDP) | Switching cycle:5-10minitues (adjustable) |
Design inlet temperature:≤45°C | Allocation of available:1.Dewpoint switch mode 2.Alarm of high dewpoint,interlock |
Regenerative adsorption air dryer for air compressors Brief Introduction
Heatless regenerative desiccant air dryers is based on pressure swing adsorption. The
adsorption system can be understood that it happens under the van der Waals force, during high
water vapor pressure adsorption processes, the van der Waals force of moist air is less than desiccant,
it means its keeping moisture ability is less than desiccant, the rate of desiccant water adsorption
is faster than desorption. As the adsorption goes on, the adsorbate density of adsorbent surface
increased gradually, the adsorption rate is slower and slower, meanwhile the rate of desorption is faster and faster. When the adsorption rate is equal to the desorption rate, the adsorption equilibrium reaches. Similarly, pressure swing adsorption technology is used in desorption process,
desorption gas uses the dry gas of the dryer outlet and reduces pressure in throttling process, now, the partial pressure of water vapor is far less than saturated vapor pressure, there’ll be a trend for the air absorbs moisture to improve water vapor partial pressure, thus the absorbed moisture of adsorbent completes desorption, then enters next adsorption cycle, desorption and
adsorption process can be simply understood as a "tug of war" between adsorbent (alumina) and
adsorbate carrier (air). As resurgent and original gas are homologous, its structure is very simple
and easy to operate. It is quite suitable for the post-processing of small and medium-sized air compressor.
Our advantage:
We are specialized inmanufcturing compressed air treatment equipment with strong technical force and abundant talent staff,have more than 20 years ' production experience .We are air dryer OEM manufacturer of KOBELCO.Also we produce pre-coolers,after coolers,precision filters,etc.Energy saving and environment friendly is our principle .With good design,careful workmanship, stable running ,long working life,etc .CE,QS,ISO9001 certificated. Rich production experiences plus strict quality control mangement, our products have been exported to America and Europe,etc, widely approved and praised.
The purification drying machine we developed can be matched with different kinds of air compressors, providing high quality air without water, oil and dust.
Type Code | Type category |
N(P)F | Room Temp. Air-cooled Refrigerated Air Dryer |
G(P)F | High Temp. Air-cooled Refrigerated Air Dryer |
N(P)W | Room Temp. Water-cooled Refrigerated Air Dryer |
G(P)W | High Temp. Water-cooled Refrigerated Air Dryer |
HD | Heatless Regenerative Adsorption Air Dryer |
ED | Eupyrexia Regenerative Adsorption Air Dryer |
XC | Blowing Regenerative Adsorption Air Dryer |
XB | Waste Heat Regeneration type Adsorption Air Dryer |
MF | Air-cooled Combined Low Dew Point Air Dryer |
MW | Water-cooled Combined Low Dew Point Air Dryer |
Special type 1 | Explosion-proof Air Dryer |
Special type 2 | Low Pressure Gas Protection Dryer |
Special type 3 | High pressure air dryer |
Please kinly tell us your interested air dryer type and treatment capacity requirements ( M3 /min ) ,we will quote you best price. Thank you !
CE certificate ISO:9001 Certificate
Packaging Detail:corrugated carton or wooden case |
Delivery Detail:within 10 days after your deposit |