Refrigerated air dryer

Refrigerated Air Dryer / Compressed Air Dryer, A compressed air dryer is a device for removing water vapor from compresso - details see: https://www.machineto.com/refrigerated-air-dryer-10297445

Type:Vacuum Drying Equipment

Place of Origin:Gyeonggi-do South Korea

Brand Name:GSA

Model Number:HYD

Refrigerated Air Dryer

A compressed air dryer is a device for removing water vapor from compressed air.
GSA’s refrigerated air dryers employ single heat exchanger that combines both
functions, one for air to air and the other one for air to refrigeration,
through which cold outgoing air cools down the hot incoming air and reduces the
size of compressor required. At the same time the increase in the temperature
of outgoing air prevents re-condensation.

Hot, saturated compressed air is first
precooled by exiting cold air in the air-to-air heat exchanger. The precooled
air then enters the evaporator where it is cooled down to its final dew point.
The mixture of cold air and condensation flows into the separator/mist
eliminator where liquids and contaminants are reliably removed and ejected from
the system via an automatic drain valve. The cold air is then reheated by the
incoming hot air before leaving the dryer.

Features & Benefits

Flow range of 18-3002 scfm (0.51-85 m³/min.)

Lightweight & compact

Precooling and reheating of compressed air for high efficiency &
low energy consumption

Aluminum block heat exchanger with integrated high efficiency
separator

Environmentally friendly R-134a refrigerant (HYD-5 to HYD-20) and
R-407 refrigerant (HYD-30~300)

Refrigerant suction pressure gauge

Refrigerant discharge pressure gauge

Inlet pressure and temperature gauge

Heavy-duty
industrial powder coated cabinet with access panel

Hot, saturated compressed air is first precooled by exiting cold air in the air-to-air heat exchanger. The precooled air then enters the evaporator where it is cooled down to its final dew point. The mixture of cold air and condensation flows into the separator/mist eliminator where liquids and contaminants are reliably removed and ejected from the system via an automatic drain valve. The cold air is then reheated by the incoming hot air before leaving the dryer.

Features & Benefits

Flow range of 18-3002 scfm (0.51-85 m³/min.)
Lightweight & compact
Precooling and reheating of compressed air for high efficiency & low energy consumption
Aluminum block heat exchanger with integrated high efficiency separator
Environmentally friendly R-134a refrigerant (HYD-5 to HYD-20) and R-407 refrigerant (HYD-30~300)
Refrigerant suction pressure gauge
Refrigerant discharge pressure gauge
Inlet pressure and temperature gauge

Heavy-duty industrial powder coated cabinet with access panel