Home  >  Apparel & Textile Machinery  >  Textile Machine Parts

Applicable for raising of polar fleece fabrics, cotton fabrics and knitted fabrics. - details see: https://www.machineto.com/raising-fillet-ra-2-for-raising-machine-10271422

Foundation	VCLC ,3ply
Width	23mm
Wire No.	27/31#
Plyback	Red
Points	310/(25.4mm)2
Total height	10mm

Caution for Store:

The raising fillet should be kept in dry and well ventilated place, high above the ground with relative humidity of 45% below and room temp between 0°c~ 35 °c. Away from heat and direct sunlight.

Binding of Raising Fillet:

Rainy day is bad for binding. Once opeed, the raising fillet sould be placed in the operation table. When binding, dry your hand before operation.

Before binding the raising fillet, the rollers should be well cleaned with sand paper and coated with coating with higher vistcosit. When te coating is half dry , start binding of the new raising fillet.

Binding of raising fillet is dependnt on varieties of fabrics and diameter of rollers thus proper tension is needed. Heavy hammer binding method is a best choice for tension control.

Recommended tension of raising fillet binding:

1)Roller diameter is bigger than Φ70 or for heavy fabrics adopt binding tension of 250N.

2)Light fluffing fabrics (loop velvet fabrics) adopt binding tension of 100N

The both end of the raising fillet should be fixed with screws.Space between the cleaning fillet and the raising fillet should be measured precisely.