QGT-1 Solid State HF Welder(400KW)

solid state H.F welder, 1. Energy saving up to 35%., 2. high efficiency & reliability, 3. flexible installation, 4. IR MOSFET & - details see: https://www.machineto.com/qgt-1-solid-state-hf-welder-400kw-10137772
Type:OtherPlace of Origin:Hebei China (Mainland)Brand Name:ZSHCModel Number:QGT-1
Voltage:235VCurrent:2000ARated Capacity:608KVADimensions:20GP container
Weight:5TUsage:quenching,braz welding & heat penetration,steel pipe/tube seam weldingAfter-sales Service Provided:Engineers available to service machinery overseasTube diameter:114-165mm
Wall Thickness:3.6-6.0mmOutput power:400KWEfficiency:more than 85%Energy saving:up to 35%
Welding method:induction welding/contact welding/dual typeCooling method:water-water or air-waterResonance method:complex reasonanceOutput frequency:(250-300)KHZ
QGT-1 Solid State HF Welder(400KW)
contact supplier for QGT-1 Solid State HF Welder(400KW)


QGT-1 Solid State HF Welder

QGT-1 solid state H.F welder is specially designed for straight seam welding. It includes Inverter output unit,DC power unit,central control Unit,water-water heat exchange unit,and rectifier isolation transformer.

The inverter part is made up by MOSFET single phase invert unit in parallel type.

Each pair of unit has 50KW ability. The pairs can be built up to reach from 50KW to 1000KW power rating. Each unit has self-diagnostics ability. All the design is to ensure easy installation and maintenance.

Automatic load matching system ensures the most efficiency and lowest mill cost. Furthermore, the welding transformer is not needed.

The protection circuits are specially designed. It can ensure the stability and safety of the welder, even in open and short circuit condition. Also it can afford coils arcing to reduce mill stop.

DC Power Unit includes rectify, flight wave, and control parts. 3-phase full-controllable thyristor rectifying bridge and flight wave reactor, flight capacitor and filter ensure stable DC output and ensure high quality welding. The stable control system ensures the safety of the welder.

Current meter, Voltage meter and control system are equipped in the DC Power Unit. With these the welder is controllable even without central control unit.

central control Unit

Installed with LCD,power and speed adjust module; Indicate the output current and voltage of the DC Power unit; armature voltage and current; field voltage of the DC speed adjusting unit. The pipe line can be completely controlled by the Central Control Unit.
  • Water-Water Heat Exchange Unit

A. Sealed circulation, outer water (normal) cools down the inner water (distilled water), no scaling.

B. High efficiency of heat radiation, low cost, applicable to large power H.F equipment.

C. Reservoir is used for outer water.

  • Rectifier isolation transformer

The input rectifier part .To ensure stable power supply and insulate the power grid.


QGT-1 Solid State HF Welder(400KW)
Packaging Detail:Free of Fumigation Wooden Packing
Delivery Detail:1month

Related Product for QGT-1 Solid State HF Welder(400KW)