Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Gear Cutting Machines

adjust shear angle & blade clearance, siemen electric & siemen motor, Taiwan HIWIN linear guides&ball screw, Bosch pump - details see: https://www.machineto.com/qc11y-hydraulic-cuillotine-plate-shears-13mm-3200mm-10125992

QC11Y hydraulic cuillotine plate shears(13mm*3200mm)

metal plate shear

,technical data

No	Item	Unit	Data
1	Shear Max Thickness	mm	13
2	Max width	mm	3200
3	Travel times	times/min	7~10
4	Stopper adjust range	mm	800
5	Cutting angle	°	2.5
6	worktable height	mm	800
7	Throat depth	mm	100
8	power	KW	18.5
9	Dimension(L x W x H)	mm	3900x1680x2150
10	weight	kg	9800

Equipments list

No	Name	Location
1	hydraulic	Bosch
2	pump	Bosch
3	seal	Japan
4	motor	Siemen
5	electric	siemen
6	Oil tank	Manashan
7	blade	Shanghai
8	connector	China
9	Ball screw	Taiwan
10	Linear guides	Taiwan

Technical characteristics

1. The frame is steel welded structure, have sufficient strength and rigidity, eliminate internal stress and high frequency vibration, to ensure the overall accuracy of the fuselage. Has a good rigidity, two cylinders fixed on the left and right columns (wallboard).
2 Turret welded steel plate box-type structure, has a good rigidity, high-frequency vibration to eliminate internal stress, through the rear pivot point gap adjustment device for the center, and can quickly adjust the blade gap. Three-point support rolling clamping rail, and drive to make an up and down gate movement around the cylinder to complete shear.
3 hydraulic Gate Structure, the return of the upper tool device, using accumulator type, speed of return. Three-point rolling bearing clamping rail, to maintain good accuracy, turret running smoothly, and can quickly adjust the blade gap.
4 series fuel tank structure, synchronization performance, and the shear angle can be adjusted, cut high quality.
5 The turret stroke can be adjusted in order to improve production efficiency.
6. On the turret to introversion structure, easy to blanking, to improve the accuracy of the parts.
7. Rectangular blade, four cutting edges, long service life.
8. Jog, single inferior operating functions, commissioning, use, and easy maintenance
Hydraulic system using integrated logic circuit, through the sequence valve control and smooth movement, low noise, simple to maintain.
10 imported ring professionally produced fuel tank control the operation of the blade.
11 pressing device when the sheet is not usual, can be free to expand pressed on the sheet. Binder fuel tank installed in front of the rack base plate, the overall circuit and stand-alone parallel compression cylinder. Into the oil pressure feed fuel tank, the head of the binder pressure to overcome the pressure of relay spring pressed sheet metal shear completed, by means of a relay spring relay reset.
12 through potentiometer to control certain extent cut, shear adjustable stroke.
13 The shear number of counter control.
14 electrical control is centralized and reliable, as follows:
Power facilities are located within the body, through the control panel button operation to control and achieve.
Has a foot switch, through its direct clipping action, and convenient.
Motor overload and short circuit protection, through the air switch.
14 safe and reliable hydraulic system
14 upper and lower knife using high quality materials, and all heat-treated, to ensure that it has sufficient hardness and long service life.
14 roller table, to facilitate feeding, and to ensure that the workpiece in the run-time is not scratched.