Home  >  Metal Processing Machinery  >  Metal & Metallurgy Machinery  >  Metal Coating Machinery

1.Excellent surface quality, 2.Delaying the life of the coating, 3.Corner and clearance can also painted very well - details see: https://www.machineto.com/putter-pt5028-2-putty-high-pressure-airless-spraying-machine-10162753

(PUTTER) PT5028-2 putty high-pressure airless spraying machine

PUTTER high pressure airless sprayer airless spraying new industry standards.

1 after the test, work performance, and service life are better than other similar coating machine on the market.

2 is dedicated to the harsh working environment.

Three tough protective coating and corrosion control application can easily cope with.

4 has the material tracking, system diagnosis and air defense protection function.

5 more configuration scheme, is the most desirable tool airless spraying operations.

6 USES the new NXT air motor technology, can prolong service life 10 times. Pulse is less, the effect is better. The noise reduction technology

New type of air motor sprayer can satisfy all of your applications.

Each loop of the output flow rate: 250 cc

The maximum working pressure: 313 bar

Maximum inlet pressure: 100 psi

Maximum freedom flow: 52.2 LPM

Typical applications: shipbuilding and maritime, train manufacturing and repair, Marine engineering, container, steel structure antisepsis, oil tank and pipeline corrosion protection, fire protection coating

The highest working temperature: 82 degrees

Air inlet size: 3/4 inch NPSM (f)

Scope of application: indoor and outdoor decoration, putty coating, heavy-duty engineering, steel structure antisepsis, based protection, fire protection coating, waterproof coating engineering, industrial floor, etc.

Can handle paint: paint, water-based paint, can be diluted volatile paint, latex paint, fire retardant coating, filler and asphalt paint, it's a two-component waterproof coating, paint, floor paint, etc.

Recommended use: indoor and outdoor wall coating, putty coating, heavy-duty engineering, fire prevention, industrial floor coating, waterproof coating engineering, basic protection, etc.

24 hours service!

Provides various kinds of mortar spraying machine, multi-function coating machine, automatic spraying machine, airless spraying machine, high pressure airless sprayer, putty coating machine, the steel structure coating machine, sprayer, emulsioni paint of paint sprayer and so on!

Indoor moistureproof putty (ST - SF)

- in 25 kg paper bags

- integrating cement, filling material, admixture, the water and play, easy and convenient

- applied to indoor cement mortar, concrete, TK board, gypsum board, such as metope and smallpox precision leveling, does not apply to wood plywood base level.

- water consumption is 10 kg/bag (25 kg)

- the construction amount is about 1.15 kg powder/m2 per mm thickness of construction

(PUTTER) PT5028-2 putty high-pressure airless spraying machine

Its advantages are as follows:

1, good surface quality. Spray paint in metope form a smooth, dense coating, no brush marks, this is unmatched by brush, roll.

2, coating with high efficiency. Single spraying operation efficiency is as high as 300-1000 square metres/hour, is artificial brush for 10 to 15 times.

3, delaying the life of the coating. High pressure airless sprayer, it adopts high-pressure jet atomization, that makes the metope paint grain gain a strong kinetic energy into the pore, make coating mechanical occlusion with metope, enhance coating adhesion, prolong life.

4, brush, roller coating thickness is uneven, about 30 microns in thickness, high utilization rate. 5, corner gaps and paint can also be very good. For paint spray does not contain air, coating is easy to reach these areas.

Determine the pros and cons of wall emulsioni paint construction effect can be searched out from the following points:

1, the surface effect for large areas of uniform colors, coating uniformity.

2, scrub resistance, high quality of metope can use emulsioni paint a wet towel to wipe out powder, it is to measure life of emulsioni paint main index. Currently very poor means emulsioni paint construction, brush and roller is used for the general construction. The resulting: A, brush marks, plucking, and uneven. B, latex wall light into light. C, the wall of flour.

More than 3, the main reasons:

A, excessive dilution due to the viscosity of emulsioni paint is higher, the backward manual besmear more difficult to open and brush mark obvious, therefore had to add water dilute. General latex paint can dilute 10% 30%, and their dilution can be as high as 60% 100%.

B, attending to prevent excessive dilution from sagging, tend to add to the latex paint, 107 glue. Above non-standard operations as a result, led to the decrease of the quality of the wall surface, adhesion, scrub resistance, simple sense is great damage. Serious and even matte paint into a cloudy white coating, low light into matte, glossy into the bottom of the low light effect. Therefore, since chose is high grade emulsioni paint of expensive, of course want to get high quality wall coating effect. Why not draw lessons from foreign experience in construction of latex paint high-pressure airless spraying? High-pressure airless spraying machine can spray the emulsioni paint of high viscosity, make your bedroom is as good as it gets.

After completion of painting, must pay attention to the finishing touches.

Cleaning spray equipment. Paint spray paint spray net and solvent alternative coatings, transporting pipeline and spray gun in the washing machine inside coating to spit out the paint is clear so far. Then spray gun to unload, and will be easy to remove the parts one by one remove, clean with solvent. After spraying equipment cleaning, will need to remove the maintenance part is removed, and adopt the appropriate maintenance measures to deal with all the components, main is to maintain good spray gun and nozzle. Finally, the use of sealed residual paint to save, and auxiliary equipment (mixer, detection tools, weighing apparatus, etc.) clean, and arrange deposit.

We are looking forward to your attention

If you are interested in any of our products or would like to discuss a custom order,

please feel free to contact us.

Tel:86+514+86599166

Welcome to visit our factory and look forward you cooperation