Home  >  Industrial Supplies  >  Industrial Filtration Equipment  >  Dust Collector

dust collector,dust catcher,dust remover,bag dust collector,pulse dust collector,DMC Pulse Dust Collector with competitive price - details see: https://www.machineto.com/pulse-bag-dust-collector-10225523

DMC type pulse blowing bag dust remover is to use (0.5 ~ 0.7 Mpa) big flow pulse valve non-interlaced filter bag blowing ash removal technology, can from a large number of super fine gas, 99.9% of dust collecting down. Not only widely used in cement plant dust management, but also widely used in non ferrous ore fine dust processing field,

Description Of DMC Pulse Bag Dust Collector:

Dust collector makes up of frame, ash bucket, in-the-box,on-the

box,bag,frame, jet cleaning devices and plc components such as control procedures. In the box is the subroom structure ,while working the gas spread out by the dust collecting duct in all ash bucket .Coarse particles directly fall into the ash bucket bottom for wind speed reducing and the ash bucket spoiler role in the collision, fine dust rose with the bag at all between the fine dust was blocked leaving the outer surface of the bag, cleaning gas clearance role with negative pressure ventilation through the bag into the mains from the body into the atmosphere, reaching the purpose of purification.

Application Of DMC Pulse Bag Dust Collector

DMC type pulse blowing bag dust remover is to use (0.5 ~ 0.7 Mpa) big flow pulse valve non-interlaced filter bag blowing ash removal technology, can from a large number of super fine gas, 99.9% of dust collecting down. Not only widely used in cement plant dust management, but also widely used in non ferrous ore fine dust processing field, in the power industry, chemical industry, metallurgy, iron and steel industries also has a good application prospect.

Working Principle Of DMC Pulse Bag Dust Collector:

1. The dust-laden air enters the bag filter.

2. The dust /powder separates inside the bag filter chamber.

3. The air is uniformly distributed avoiding channelling while the powder is separated.

4. Initially a coat of material forms on the bags. Subsequently, the coat acts as the filtering medium.

5. The dust is accumulated on filter elements while the air passes through the filter bags fromoutside to inside.

6. The accumulated powder is dislodged from the bags by reverse pulsejet air intermittently.

7. The dislodged powder falls on bottom cone and is discharged through powder discharge valves.

8. The dust free air is sucked by induced draft fan and is exhausted to atmosphere

Technical Parameters of Pulse Bag Dust Catcher:

model	Total filter area (m2)	Filtering wind speed (m/min)	Input air (m³/h)	No. of filter bag (pc)	Specification of filter bag (mm)	Air consumption (m³/h)	Density of inlet (g/m³)	Density of outlet (mg/m³)
DMC-32	24	1.04-1.67	1500-2400	32	Φ120x2000	0.032	200	50
DMC-48	36	1.15-1.62	2500-3500	48	Φ120x2000	0.048
DMC-64	48	1.21-1.74	3500-5000	64	Φ120x2000	0.064
DMC-80	60	1.25-1.67	4500-6000	80	Φ120x2000	0.08
DMC-96	72	1.27-1.62	5500-7000	96	Φ120x2000	0.096
DMC-112	84	1.28-1.68	6500-8500	112	Φ120x2000	0.11
DMC-120	90	1.3-1.76	7500-9500	120	Φ120x2000	0.12
DMC-168	126	2.54-2.87	9500-10500	168	Φ120x2000	0.168