Home  >  Industrial Supplies  >  Gas Generation Equipment Parts

PSC EC Centrifugal Blower Fan 245x218x138mm with CE and Erp 2015, 1.EBM Quality, 2.Energy-saving, 3.Long life - details see: https://www.machineto.com/psc-ec-centrifugal-blower-fan-245x218x138mm-with-ce-and-erp-2015-10221979

PSC EC Centrifugal Blower Fan 245x218x138mm with CE and Erp 2015

Company Profile

PSC Motor and Fan is an American company specialized in Thermal Solution since 1993, and its main products are DC/AC/EC Backward Curved Impeller, Axial Fan, DC/AC/ECAC Blower and CPU Cooler.

PSC has been a major supplier to HP Compaq, IBM, ATI, Cisco Systems, Rockwell Automation, NCR, APC (American Power Conversion, SGI and other many well-known companies in the world.

Key Features

– Low noise at high air flow and low back pressure

– High air flow at low flow rates

– Good contact of cooled ducts and surfaces with cold air due

– to the expanded width of the exhaust surface

– Very flat design

– Moisture-protected versions, for example for refrigeration

– technology

– GreenTech EC motors enable higher speeds and a higher

– maximum pressure than is possible with AC motors, as well

– as intelligent speed control via PWM signal

ErP 2015

For products with an input capacity between 125 W and 500 kW, the new European Energy-related Products Directive (ErP) to improve energy efficiency will enter into force in 2015 at the latest. Thanks to leading edge GreenTech EC technology, all PSC fans and motors in these performance classes exceed the ErP Directive even today.

What exactly is ECAC technology?

WhenPSC Motor and Fandescribe their range ofECACproducts, we use the acronym “ECAC,” to refer to an electric motor, fan, blower or impeller that is powered byElectronicallyCommutatedAlternatingCurrent.

This means that the power to the unit comes out of the available power socket; this is 115V AC in the US and 230V AC in Europe and Asia.

EachPSC ECACMotor is equipped with sophisticated on-board Voltage Conversion Circuitry that converts the 115V AC or 230VAC power input to 90V DC power, and it is this current that actually powers the Motor.

As the motor itself is now actually powered by DC input, we can now incorporate the standard DC Motor functionality that would not be available with a standard AC powered unit.

This functionality includes the following features:

l The biggest benefit isPWM Speed Control or Analog Speed Control.This allows the User to vary the RPM of the motor to whatever speed is needed by his system; with a standard AC motor, it has to run at maximum speed at all times.

l A Tachometer Out Signalis provided, so that the User can monitor the performance of the motor. This signal usually provides 3 Pulses per Revolution.

l AnAlarm Signalcan also be available which tells the User if the Motor has stopped for some other reason.

The major advantage ofECACtechnology, as compared to a straight AC-powered electric motor, is thePower Savings.

As an example, a standard 225mm AC Impeller may consume 160 Watts in power, whereas an equivalent 225mmECACImpeller may consume only 108 Watts in power, thereby using62 per cent as much power as the AC unit.

ECACpowered electric motors, and by extension the full range of ECAC air moving devices manufactured byPSC Motor and Fan, will see on average a drop in power consumption of at least 30 per cent over an equivalent conventional AC powered unit.

Base Parameter

Outline Drawing & Performance Curve

Certification Authority

Factory Tour

Customers and Partners

Express and Payment