Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Rotary Drying Equipment

1.capacity: 4-7ton/h, 2.high efficiency from moisture 50%-70% to 2%-4% - details see: https://www.machineto.com/professional-three-drum-wood-sawdust-rotary-dryer-10294642

1. Introduction of Machine

Patent number:[ZL200920307482.X][ZL200910305283.X]

During charcoal-making process, the drying effect determines the quality and production of charcoal.

After dried completely and even, the rods-making machine can able to make rods with high-density and low moisture content. Then subsequent carbonization process will produce high-quality charcoal.

If the drying effect is not good enough, there will appear such phenomenon like loose carbon or carbon with loose structure, low heat value and high ash content.

Fusheng Charcoal Co., Ltd. spent five years on developing the rotary tumble dryer equipment. Meanwhile, Fusheng spent eight years on developing the three-drum dryer equipment.

2.Technical Data:

Model	Capacity (t/h)	Power (kw)	Weight (t)	Input moisture	Output moisture
Rotary dryer FS-B03	1.5-1.8	8.25		30%	2-4%
Rotary dryer FS-B04	2.1-2.4	11.45	4	30%	2-4%
Rotary dryer FS-B05	2.5-3	15	6	30%	2-4%
3 drum dryer	3-7	20	12	70%	2-4%

3. Rotary dryer:

Can dry the raw materials from 30% water content to 2%-4%.

The capacity is 1.2-2.1t/h.

The length is 1350cm, the diameter is 112cm and the inner diameter is 100cm.

4. Three-drum dryer

The capacity is 4-7t/h.

Can dry the raw materials with 40%-60% water content to 2%-4% all at once.

Outlet air temperature of three-drum dryer is low and the dust removing device can use for a long time.

5.Drying furnace

Application: supplying heat for dryer. The drying furnace is used for drying raw materials and materials are sent to rods-making machine finally.

Fuels: firewood, grass and waste wood

Heating capacity: 16sets rods-making machine

Heating mode: centralized heating

After transformation, the temperature of hot wind by drying furnace has raised from 400°Cto 1200°C, thus can save fuels by about 60%. And the smoke can be decomposed at high-temperature region.