Home  >  Construction Machinery  >  Building Material Machinery  >  Brick Making Machinery

1enough source of goods.2our pressurized elements have enough strength and toughness.3advantage in welding.4ten years experience - details see: https://www.machineto.com/pressure-steam-autoclave-for-industry-glass-block-wood-10076102

What is AAC?

1. Aerated Autoclaved concrete block (light block ) is the light and porous buidling material. It has light ,keeping temperature ,Environmental protection,can't burn and other advantages.it has a wide prospect of market.it is the main building material in the future. it can be made into many kinds of bricks(for example:600×200×100,80×80×180,240×115×53,600×200×125),

they could be used industry building and common building.they are more and more popular in the world.in the future,they will replace the Clay brick completely.

2.Areated concrete common conception

Common concrete density is usually 16002400kg/m3,but Areated concrete are 500kg/m3,600kg/m3,700kg/m3.It has not the big grain,main use silicon material (for example:flyash,sand,stone dust and others ),through making the material small for example sand,they can be used directly if has enough degree of small (for example fly ash.Mixing calcium material lime, cement water to a special slop,then add the aluminum dust and the additive.Make the aluminum dust and the special slop have a Chemical reflect.then produce Hydrogen to make the concrete slop to expanding or swell,foam.Next,put them into the curing room to concreting cutting steaming curing,last,there will bacome the light brick,the porous rate is 70-80%.

Feathers of AAC

1.Sound proof

AAC wall has an excellent sound Transmission class (STC) ,rating of 44. Result: Virtually Soundproof Interiors!

2.Thermal Insulation

It has highest thermal rating in the industry….R30! Thus provides well insulated interiors, keeping out warm air in summer and cold air in winters.AAC reduces Air conditioning cost by 30%.

3.Earthquake Resistant

Earthquake forces on structure are proportional to the weight of the building, hence AAC shows excellent resistant to earthquake forces. Regions of high seismic activity like Japan exclusively use AAC. It has been proven to withstand wind loads of category 5 tropical storms.

4.Floor Space Area

Use of thinner blocks (6" instead of 9" exterior walls) because of its excellent water barrier & insulation properties leads to an increase in floor space area between 3-5%.

5.Cost saving

Being lightweight AAC drastically reduces the dead weight of building, resulting into reduction in steel (up to 27%) and cement (up to 20%) structural cost saving.Being 8 times the size of a clay brick, AAC wall construction involves 1/3 the joints, thus an overall mortar saving up to 66%.

Its automatic manufacturing process gives AAC an exceptional dimensional accuracy & smooth surfaces, eliminating need of three-coat plaster walls and allows for a final 6 mm skim coat (putty/POP).

6.Fire Resistant

Best in class fire rating of 4 hours. The melting point of AAC is over 1600 ºc, more than twice the typical temperature in a building fire of 650 ºc.

AAC land and workshop require:

50000m3 to100000m3,workshop is 2000m2,the land is 8000m2,

150000m3,workshop is 2500m2,the land is 10000m2,

200000-300000 m3,workshop is 3000m2,the land is 15000m2.

Above please refer to ,the bigger the better.

More details:

1. cheap autoclave machine
2. Germany technology
3. Simens Electronic component
4. Smart control system
5. Reasonable structure.

This product is key equipment which has a widely application in building material factory to autoclaved cure different kinds of building materials. It is also used in areas of chemical, textile, wood, metallurgy, military industry. Convenient operation, security and reliable are its advantages.

Autoclave belongs to pressure vessel which has explosion risk. According to the supervision regulation on safety technology for pressure vessel on divide standard of pressure vessel, the product is part of first and second class pressure vessel. Before putting into operation, the end-user must register in the local boiler and pressure vessel safety supervision organization and acquire the operation permit, at the same time it must accept supervision and inspection.

This product is key equipment which has a widely application in building material factory to autoclaved cure different kinds of building materials. It is also used in areas of chemical, textile, wood, metallurgy, military industry. Convenient operation, security and reliable are its advantages.

Autoclave belongs to pressure vessel which has explosion risk. According to the supervision regulation on safety technology for pressure vessel on divide standard of pressure vessel, the product is part of first and second class pressure vessel. Before putting into operation, the end-user must register in the local boiler and pressure vessel safety supervision organization and acquire the operation permit, at the same time it must accept supervision and inspection.

Item	Type
	FGZSS1.5-1.65*L	FGZCS1.5-2*L	FGZSS1.5-2.5*L	FGZSS1.5-2.68*L	FGZSS1.5-2.85*L	FGZCS1.5-3*L	FGZCS1.5-3.2*L
Inner diameter	Ø 1.6m	Ø 2m	Ø 2.5m	Ø 2.68m	Ø 2.85m	Ø 3m	Ø 3.2m
Length*1	L	L	L	L	L	L	L
Designed pressure	1.6Mpa	1.6Mpa	1.6Mpa	1.6Mpa	1.6Mpa	1.6Mpa	1.6Mpa
Designed temperature*2	204°C	204°C	204°C	204°C	204°C	204°C	204°C
Max operation pressure	1.5Mpa	1.5Mpa	1.5Mpa	1.5Mpa	1.5Mpa	1.5Mpa	1.5Mpa
Max operation temperature	201°C	201°C	201°C	201°C	201°C	201°C	201°C
Medium	Saturated steam
Track gauge/height	600mm/ 150mm	600mm/ 150mm	800mm/ 200mm	800mm/ 250mm	963mm/ 280mm	1220mm/320mm	1220mm/ 320mm
Corrosion allowance	2mm	2mm	2mm	2mm	2mm	2mm